To remove the front wheel studs ,
remove wheel
remove caliper and rotor
hammer in broken stud insert new stud ,thread with washers and tighten it down to seat the knurl.
No need to remove the hub as it has spots for it to pop out by rotating it.
Don't say that before people think they should add them to anything.
Puddle lights are Japanese styling product used for luxury cars with a VIP theme. So highly modified slammed huger wheeled cars use this instead od neons as it is a luxury style item to keep your shoes clean.
Pick somewhere else beside megawheels , pram can be an azz as he has been to me when i needed to get some rubber seals .
tires23 is not bad but usualyl you can find wheels all over that will fit for cheap.
No , you would not see fluid unless your seals are dead and the piston falls out.
The seals are holding the fluid but allowing it to by pass a small amount which over 10 pistons means volumes.
I would have the brakes looked at properly .
You want to make sure the pistons are not seized and the sliders are clean and lubes properly.
Something on your brakes is uneven.
Where was the alternator tested from the battery ,its leads a scan toool , or right on the alternator.
It could be a bad ground which woudl do the same things.
I would check them before anything else