Jump to content


SKperformance

Regular Member
  • Posts

    12,484
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by SKperformance

  1. Ok i will check to see if he has some like that, atleast i will know pretty quickly if he has any chrome ones.
  2. true, the one behind my house closed down on Mississauga road !
  3. check your fluid level otherwise check if your parking brake is fully released
  4. Best and easiest is getting a new sub only amp with a sealed enclosure for it to mount to the original hole using a crystal line line translator ok is to not use a translator as it is only bass then there is a good free air sub and amp with built in high pass cheapest is just sticking a new 6" or 8" sub either free air or a sealed on with a box using the factory amp even a bazzoka tub facing up would work nice but look odd.
  5. If they marked none down but this is some and you are sure they were not there befoer then they wont go to court tell them to fix it or call lexus head office, let them know you are being threatened with civil court action for there damages. I am sure they will respond as needed.
  6. I like stevies idea of selling both but to pick one i would keep the newer camry not as luxurious but a solid and newer car depending on which is in better overall shape/
  7. yah pioneer is just a small buisness who buys from sunoco and sells for less plus gives you coupons to return for cheaper gas everytime
  8. i got a set in the buy and sell section in my thread there
  9. alittle more info would help does it always start fine? what rpms is it at before shifting into gear? Is the engine hot or cold? If you rev the engine a bit does it not stall?
  10. don't have chevron in Toronto i used shell because of airmiles now i use shell or pioneer/sunoco don't use petro though
  11. In the other posts you searched what did you find?
  12. yup you are replacing all the leather , i am sure if you wanted a larger cushioned wheel you could keep the old one on but you might as well take it off
  13. lots of threads on this same subject all over the forums
  14. optimas go on sale as much as bently's have a year end clearout of last years modles.
  15. o2's can get fouled by running too rich causing tehm to get coated in carbon, running to lean kills sensors easily by having too much heat and tehy crack there resistor. Rare but happens, more time it just needs to be cleaned A motorvac just cleans the entire system and removes the carbon off everything to get all sensors in the fuel path running properly.
  16. use TB cleaner followed by brake clean to remove film wd 40 will cause dirt to stick and plug the parts you have just cleaned
  17. To use the paint it should be about $25 for paint 15 prep and 20 primer so a total of 60 to make it look as good as possible since otherwise it will not be able to adhear properly his kits also go right over the spokes unlike the wheelskins ones which look bad since it doesn;t go over them for a factory look
  18. have you tried spraying some wd 40 to clean up the old grease which is probably locking it up from moving before taking apart the door?
  19. new struts won't fix the problem the best way is to have the wheels hubs shaved down a rew mm to make it closer to 43mm - offset should be less than $100 for all 4
×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery