cduluk Posted April 16, 2009 Share Posted April 16, 2009 Hey guys!! Just thought i would post a few pictures of the interior of my Rx300 where i've added some LED modifications. A few years ago my cousin purchased an 07 Rx350 and i noticed some of the nice LED upgrades, such as blue LED's in the cupholder area, and LED's in the inside door handles. The night i got home, i drew up some plans and schematics to add these functions in my 03 Rx300 :D In these pics you'll notice: - green LED's in the coin drawer. I mounted a switch to control the lights to illuminate only when the drawer is opened. This is for all the nights at the drive-thru at Burger King fumbling with change :P - green LED's in all 4 interior door handles. I chose green so that it would match the factory green of the radio console etc. I initially had amber like on the rx350, but decided green was a better match. - blue LED's in the center top drawer illuminating everything in the cup holder area. I also created a white LED tube illuminating my radar detector controller and display. There is also a blue LED illuminating a "slit" at the opening end of the ashtray cover. Lastly a blue LED illuminating the handle area where you open the drawer. - blue LED's illuminating the flip-up cup holder. When the cover is closed, the outline is illuminated as well. I also have white LED's in all 3 dome lights, not pictured. These lights may seem EXTREMELY bright, but they're just right. They also dim with the rest of the radio console lights etc as they're on the same circuit. I hope you enjoy :) Please comment!! Quote Link to comment Share on other sites More sharing options...
cduluk Posted April 16, 2009 Author Share Posted April 16, 2009 Quote Link to comment Share on other sites More sharing options...
cduluk Posted April 16, 2009 Author Share Posted April 16, 2009 I added another light mod too. I bought some rx330 illuminating scuff plates. Had to do some cutting, heating/melting/shaping etc but i got them to fit in pretty well! There's no way the Rx300 didn't mate with something else to produce the rx330, because these pieces were SO close in size. lol Also changed out the amber to white-ish blue which i think looks much better. Now it matches the keyring hole i changed to the same whiteish blue. These scuff plates now go one whenever the keyring light does because that's what i used as the power source. Just ran wires under the carpet to each location. Took 4-5 hours to do minus the trip to the accident room lol... Got the scuff plates for $165 shipped to my door from ebay. The tan of the rx330 matches the tan of the rx300 perfectly. absolutely perfectly :) Here are some pics! :) Tell me what you think. Quote Link to comment Share on other sites More sharing options...
cduluk Posted April 16, 2009 Author Share Posted April 16, 2009 Quote Link to comment Share on other sites More sharing options...
tjmc11 Posted April 17, 2009 Share Posted April 17, 2009 Very nice. You certainly have upgraded you RX 300 to a RX 330 level. Nice work. Quote Link to comment Share on other sites More sharing options...
blk_on_blk Posted April 17, 2009 Share Posted April 17, 2009 Yeah, definitely nice... very impressive work/craftsmanship on all your efforts!! I really like the center console lighting... that would be helpful! Quote Link to comment Share on other sites More sharing options...
cduluk Posted April 18, 2009 Author Share Posted April 18, 2009 Thanks for the compliments guys (: Yes indeed the lighting in the center drawer is a help. At night you can't see a darn thing in there Quote Link to comment Share on other sites More sharing options...
Lucky13 Posted April 18, 2009 Share Posted April 18, 2009 I love how the LEXUS in th step plate lights up. Quote Link to comment Share on other sites More sharing options...
Karl K Posted April 19, 2009 Share Posted April 19, 2009 Real nice work. Thanks for sharing all that. Quote Link to comment Share on other sites More sharing options...
jmcohen23 Posted April 20, 2009 Share Posted April 20, 2009 very nice. how did you get the GPS in? I was told that we could not do that on RX300's. Quote Link to comment Share on other sites More sharing options...
cduluk Posted April 20, 2009 Author Share Posted April 20, 2009 My rx300 had it stock (it's an '03), i just made a custom bezel for it :) Quote Link to comment Share on other sites More sharing options...
lexus114 Posted April 21, 2009 Share Posted April 21, 2009 Thanks for the compliments guys (: Yes indeed the lighting in the center drawer is a help. At night you can't see a darn thing in there Hey "C" glad to see your still at it!! Quote Link to comment Share on other sites More sharing options...
cduluk Posted April 22, 2009 Author Share Posted April 22, 2009 Always will be :) Working on another headlight projector retrofit, this one's gonna be AMAZING <_< Should be done in a month or so :) Quote Link to comment Share on other sites More sharing options...
Dave_02RX300 Posted April 22, 2009 Share Posted April 22, 2009 Way cool! Quote Link to comment Share on other sites More sharing options...
vvnn Posted June 4, 2009 Share Posted June 4, 2009 Hey guys!!Just thought i would post a few pictures of the interior of my Rx300 where i've added some LED modifications. A few years ago my cousin purchased an 07 Rx350 and i noticed some of the nice LED upgrades, such as blue LED's in the cupholder area, and LED's in the inside door handles. The night i got home, i drew up some plans and schematics to add these functions in my 03 Rx300 :D In these pics you'll notice: - green LED's in the coin drawer. I mounted a switch to control the lights to illuminate only when the drawer is opened. This is for all the nights at the drive-thru at Burger King fumbling with change :P - green LED's in all 4 interior door handles. I chose green so that it would match the factory green of the radio console etc. I initially had amber like on the rx350, but decided green was a better match. - blue LED's in the center top drawer illuminating everything in the cup holder area. I also created a white LED tube illuminating my radar detector controller and display. There is also a blue LED illuminating a "slit" at the opening end of the ashtray cover. Lastly a blue LED illuminating the handle area where you open the drawer. - blue LED's illuminating the flip-up cup holder. When the cover is closed, the outline is illuminated as well. I also have white LED's in all 3 dome lights, not pictured. These lights may seem EXTREMELY bright, but they're just right. They also dim with the rest of the radio console lights etc as they're on the same circuit. I hope you enjoy :) Please comment!! Outstanding! Humbling, but outstanding. What is the in your ash try - controler? Quote Link to comment Share on other sites More sharing options...
exmeaguy Posted January 10, 2010 Share Posted January 10, 2010 How did you change the scuff lights from amber to blue/white? Where did you find the blue leds? Quote Link to comment Share on other sites More sharing options...
cduluk Posted January 11, 2010 Author Share Posted January 11, 2010 How did you change the scuff lights from amber to blue/white? Where did you find the blue leds? Uhhh all i did was replace the amber LED in the unit with a blue one, and replace the resistor to compensate for the difference in voltage and current. And since this was a complete retrofit (the Rx300 doesn't have these from the factory, they were from an Rx330) i did all the other wiring myself :D I got the LED's from mouser electronics and the resistors from.... well not sure exactly, somewhere online Quote Link to comment Share on other sites More sharing options...
bergi85 Posted April 14, 2010 Share Posted April 14, 2010 I'm thinking about changing the green lights that are in the center console to be white. I have seen a thread on how to do this, but i didn't bookmark it. Does anyone know where that is, or have ever seen/done this? Quote Link to comment Share on other sites More sharing options...
alitech Posted October 21, 2010 Share Posted October 21, 2010 Hey C Do you have a step by step on these? Which bulbs did you purchase. Were they white LEDs with a blue plastic cover for the effect in the centre console or was it blue LEDs altogether? I have blue lights in the centre console already but not sure if they are LEDs. I have an 05 rx400. I would love to see how you did the panels and which bulbs you used there. Cheers. Quote Link to comment Share on other sites More sharing options...
cduluk Posted October 21, 2010 Author Share Posted October 21, 2010 Hey C Do you have a step by step on these? Which bulbs did you purchase. Were they white LEDs with a blue plastic cover for the effect in the centre console or was it blue LEDs altogether? I have blue lights in the centre console already but not sure if they are LEDs. I have an 05 rx400. I would love to see how you did the panels and which bulbs you used there. Cheers. Unfortunately i don't have step by step instructions for adding the blue lights to the center cubby... I can tell you i used blue LED's and that it was pretty simple to wire them up, just had to drill holes in the console wherever i wanted them. If you click on the last link in my signature "TUTORIAL: Cup Holder Cover Wood Conversion Project (Rx300)" you can see how i wired the LED's in the flip-up cup holder of the Rx300. I was doing it for someone else and took pics along the way. I had done mine the same way. And you said you have an 05 Rx400? Is that a typo? If you have the Rx400h (06-08) then the blue lights in the cubby and cup-holder area are indeed blue LED's. Quote Link to comment Share on other sites More sharing options...
Nand Posted October 24, 2010 Share Posted October 24, 2010 Really cool. Quote Link to comment Share on other sites More sharing options...
AJK54 Posted January 21, 2011 Share Posted January 21, 2011 I have an RX350 2010 pretty loaded. The first complaint I had about this truck was the lack of ambient light in the console area! You can't see anything in the center or on the console above where the interior map light are. Who could I get to do some things like you picture here? I'm handy enough to do an oil change and thats about it. By the way, where did you put the switches for all those lights? There is a speed and sound shop in my town. I'm thinking (for a small fortune I'm sure) they do things like this. I see alot of kids and their "fast and furious" honda civics, suburus, etc there. Quote Link to comment Share on other sites More sharing options...
cduluk Posted January 26, 2011 Author Share Posted January 26, 2011 I have an RX350 2010 pretty loaded. The first complaint I had about this truck was the lack of ambient light in the console area! You can't see anything in the center or on the console above where the interior map light are. Who could I get to do some things like you picture here? I'm handy enough to do an oil change and thats about it. By the way, where did you put the switches for all those lights? There is a speed and sound shop in my town. I'm thinking (for a small fortune I'm sure) they do things like this. I see alot of kids and their "fast and furious" honda civics, suburus, etc there. Hmm.. honestly i don't know of any shops or people that do this type of stuff, at least not without "already-built" systems. It's not really possible to build and sell pre-fab'd parts that one can install as most of the work requires drilling and complicated wiring... And there aren't (well, "weren't") any switches for the light additions i added, i just wired them up to go on with the factory lights. They even dimmed with the dimmer switch just like the rest. Quote Link to comment Share on other sites More sharing options...
AJK54 Posted January 29, 2011 Share Posted January 29, 2011 I have an RX350 2010 pretty loaded. The first complaint I had about this truck was the lack of ambient light in the console area! You can't see anything in the center or on the console above where the interior map light are. Who could I get to do some things like you picture here? I'm handy enough to do an oil change and thats about it. By the way, where did you put the switches for all those lights? There is a speed and sound shop in my town. I'm thinking (for a small fortune I'm sure) they do things like this. I see alot of kids and their "fast and furious" honda civics, suburus, etc there. Hmm.. honestly i don't know of any shops or people that do this type of stuff, at least not without "already-built" systems. It's not really possible to build and sell pre-fab'd parts that one can install as most of the work requires drilling and complicated wiring... And there aren't (well, "weren't") any switches for the light additions i added, i just wired them up to go on with the factory lights. They even dimmed with the dimmer switch just like the rest. Quote Link to comment Share on other sites More sharing options...
AJK54 Posted January 29, 2011 Share Posted January 29, 2011 Could you give me an example of an "already-built" system. Do you mean a kit of some sort? I'm sure there would be something I could live with. The one thing I'm pretty sure of is that most Lexus dealerships won't touch this. I am basically talking about some lights under the console, (the 2010 has a large opening between the two front seats) then maybe a few under the back seats, and finally, one in the cupholder area. Wireing the system to come on and off with the rest of the interior lights is good. I would also like to have a switch somewhere to turn them on and off alone as well. There seem to be plenty of "blank" switch covers in tthis truck. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.