Jump to content


SKperformance

Regular Member
  • Posts

    12,484
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by SKperformance

  1. it is a garbage taiwan (china) knock off
  2. funny enough , already am palnning one for next year with plans of driving to nopi after for any interested but my start point is here in Toronto to see the RX being built outside of Toronto. Just waitnig for confimation from tmcc for approval
  3. agreed with z8 nice perspective and truly well balanced since you know ,not guess
  4. what year car? I would suggest to change the battery cables and terminals as well as the alternator isnlt being charged properly
  5. useless for a vehicle in toronto unless as it would need to be plugged into a wall receptacle the temp of the fliud of the coolant in the water jacket of the block is kept at about 10 degrees unless the car is always parked outside all the time in -20 degree weather
  6. Your old mast you removed may have broken and let a peice of plastic in the assembly causing it sto be grinding
  7. if they are reusing belts are tehy reussing anything else? I would get that confirmed in a list of all parts that are removed and reintalled you might end up with your old engien minus the block and head
  8. How is it bad for the engine freak? I know nothing being bad of them except for propganda of people who don;t have them . I would not get the magic Of all of them i would only get the viper, it all depends on who is working at the store preferable go to an high end audio store you pay more for what yuou get i have a a clifford with lifetime warr and labour but i got lots of additional options and payed good money for it
  9. Made a post a long time ago with step by step instructions it will give you all the info you need to remove and reinstall
  10. their is still a slim chance the nail or something is very close to the inner edge of the tire which is why you can only here it when turning and the camber goes negative on the right wheel to make a tighter turn. so it would be th right wheel to check that is the passanger side not drivers as left and right on a car is veiwed from the drivers seat not facing the car
  11. no problem i mean getting the round red lights on the trunk in clear form and wiring them
  12. agreed bart take vanos a great idea which employs valve in the intake manifold to adjust airflow in the runners for a better torque band But a bmw will handle very nicley and look nice as well. nmo one ever said they were cheap to maintain
  13. I had the same problem years ago i replaced my battery all the wires for grounds and to the starter and now it sits for weeks at a time with only occasional boosts found the cables were degrading and not giving the battery a full charge so it was very easy to die once it sat
  14. the roof should have 4 drains in each corner ,they are small holes wd 40 is a lubricate used for hinges and other stuff it works good to loosen debris as it bubbles and is about $2-3 for a can and it is everywhere 7/11 to walmart and beyond ,everywhere sells it. To use it comes with a small pipe to attach to the nozzle then find the holes and spray them right inside in short bursts or it will bubble out into your face with the pressure if blocked. i'll take a look in a minute to see where exactly they are
  15. lots of discussion on the gas grade in general maintance
  16. lots of discussion on the gas grade in general maintance
  17. of all of them the viper is the best( direct electronics) do not worry abuot product pricing it is the install which will out last the alarm and cause more or less problems. You do not need a bypas system just a good installer to hook the alarm up properly to not arm the stock alarm so it can autostart withouth setting the oem alarm off by using the alarm sens wire for locking and unlocking of the doors.
  18. $130 for the head and $30 for shipping since the bulbs along cost $8 a peice x i think it was 8 it would be ground and would also have to be insured
  19. their are but they work no better a good way to is add a fog light under the bumper to illiminate the ground but hidden from veiw another is to get the trunk lights in clear form and rewire them to also turn on with the reverse lights for added visability
  20. rent a wet vac and extract the water then check the drains for the sunroof they may be blocked try spraying wd40 with the nozzel tip into them to see tehm pour out by the wheels
  21. why i like the alpina more? or live in Canada? I assume the alpina It is rare and is track ready but very drivable.
  22. Actually i am born in London ,I live in Canada Besides i like the alpina versions for the e36 more.
  23. lmao that's a thought but its not the volume but the quality of the posts lol
  24. nope had a production date of 94 with the M3 sport seats (manual) badges on the fenders teg inside glove box motorsport rims m3 spoilers and kit including the engine the Mtech is a nice vehicle but not as fast by far can;t find the pics of the inspection i did on it so i can't post the vin and pics
  25. that helps i already did ,what are you referencing to as it is rather long
×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery