Jump to content

Pics And Video Of My Gte'd Sc300


Recommended Posts

I have been on the board for a bit, but never posted. Since I do have a question I figure I'd post videos and pics as a trade... :D

Question: How many RSP SC300 5 speeds did Lexus make? Who can I call at Lex to get production numbers? Anyone here know?

Now on to my bucket...

Here are the list of mods...

2JZ-GTE Swap, AEM EMS, AEM CDI, AEM UEGO,Arias Pistons, Crower Rods, Race Port Head, 1mm oversized Ferrea, HKS 272 Cams,Virtual Works Intake/Exhaust Manifolds, PTE74S Turbo, 1000CC injectors, Big !Removed! intercooler, 4inch downpipe/midpipe into dual 3.5s, Supra 6 Speed and Rear end. Lots of custom stuff.

All the work was done by Virtual works racing here in Vegas except the wiring which was physically done by me and guided by Clint Pohler.

Everything works in the car except for the temp gauge because the 350ohm resisitor is the wrong value for it. However the AEM knows what the right temp is and thats all that matters:)

For those that are looking closely the new redline is at 8700.

Video is hosted with 512K up so be patient.

http://24.234.117.190/video/1.wmv

http://24.234.117.190/video/2.wmv

Pics are highres and not 56k friendly.

http://24.234.117.190/cl/1.jpg

http://24.234.117.190/cl/2.jpg

http://24.234.117.190/cl/3.jpg

http://24.234.117.190/cl/4.jpg

http://24.234.117.190/cl/5.jpg

Mike

Link to comment
Share on other sites

I don't know how many RSP sc300's have been made, but yours is the 3rd one I've ever seen.  You might just want to call the local lexus dealership and ask, I'm sure they'll know.  Nice car though.  What kind of power are you making?

I'll know in a few weeks. Going for the 100 octane runs this weekend and the c16 runs the weekend after that. We're hoping for 930 on c16... Should be close. Thanks for the compliment...

Mike

Link to comment
Share on other sites

wow i like it!!! 1000cc injectors, and 100 octane probably means your pushing anywhere from 5-maybe 800 hp? and whats this with low boost? thats a joke right?

Hahah , Thanks. Well its funny because I'm used to hearing about other cars (*cough* domestics running low boost meaning 5psi and high boost is like 14-16psi.)

Virtual Works has been build very very fast and reliable Supras for years so When they told me what kind of pressures I'd be running I about freaked. Low boost is at 25psi, and high boost on C16 is 39psi I figure the scale is just "different".

My S.W.A.G on hp is about 520 as it sits now and over 900 on the C16 tune. We'll know soon enough. :)

Mike

Link to comment
Share on other sites

Minus the stock SC300, what does it cost to do something like this? Thx

I would say that depends on the amount of work you did yourself, the deal you got on labor and parts, and how much tuning went into it. Probably a good estimation would be around $20,000 (close to cost on parts, and a lot done by yourself) to $35,000. The TT components and engine build would be among the most expensive parts as a whole, with labor and the turbo components coming in next. All in all pretty pricey, but well worth the investment in my eyes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership