Jump to content

SKperformance

Regular Member
  • Posts

    12,484
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by SKperformance

  1. oem ones are pretty good but don't get ngk's they are crap . I don;t have wires so i can;t change them on my ES
  2. the passanger seat is completly manual?
  3. I doubt it is the ecu which fuse exaclty keeps blowing? It is probably just damaged wiring? there is only one leveling ecu for both sides of the car so none would work if it was bad but the lights would light up just not move up and down if the bulb itself doesn;t light up then remove the bulb and try putting a fuse back in to see if it is the bulb.
  4. Don't forget the the lug bar and security socket for the wheels and a hubcap remover for some damn reason,atleast mine did.
  5. Only one i know of for sure with a cold start injector is the 92-93 Es 300 with a 3vz-fe engine.
  6. If the fan clutch isn;t working properly then that is your problem right there. Are you driving at highway speeds and it is overheating? Or just at idling?
  7. yup the 2 bolts from the rear caliper sliders fit right in there to remove them.
  8. agreed use the duster to lightly brush the surface not let it sit on the car and move it. I used to get the same marks until i realized how to use it properly,. Also wash it everyso often
  9. Iridium is the best for performance but platinum lasts longer. Copper is one of the best conductors but wears quickly compared to them
  10. the rims and tires will work fine on an RX the offset is what is dependant on the wheel rubbing.The right offset will not need spacers.
  11. read the faq for good ideas 92-93 garbage engine 94 new internals but looks like the 92-93 95-96 face lift 97-01 engine sludge possibilities ,egr and idle control problems 00-01 got new headlights with HID's and taillights as well as rims and is the nicest looking of all mcv-20's but for 14 grand i don;t know what is available in your area for that price.
  12. easiest way is to load the pic in the LOC gallery and leave us a link to it here. glad it worked out.
  13. I would say it is the plastic tab which can break when it is over stressed from pulling the handle all the way and letting go quickly. Just a small white tab,you should be able to buy it seperatly.
  14. if they put brake in Canada then they would have to also have the word sorte for stop as i am not sure what brake is in french,too complicated
  15. you might have a worn ball joint or tie rod end need to get it checked out
  16. It is for compression basically so you don;t get jolted by soft and then a loud passage from some music like classical. Most music does not needed.
  17. 17's look nice 18's look best anything over is overkill for looks not performance driving. You should have better braking as there is less sidwall to soften the treads contact patch to the road.
  18. my drl's work fine but i never use them as i drive with full headlights 100% i want to be seen so i don;t get my babies hit. It is more than likely a relay or fuse that has been removed as some owners don;t want it.
  19. most repair manuals will give you a basic break down any service advisor at lexus can show you the exacts for some of the code but it is mainly year engine, place of assembly, i think colour depending and some other stuff as options
  20. The cats weren't the problem they were the result.
  21. they are alo free from lexus' website
  22. cv boots don;t make any noise ,broken or not. It is more than likely a bearing or a tire. got any more info
  23. yes they are different all canadian vehicles since 1990 all have drl's by law
  24. what do you want to know
×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery