SKperformance

3m has always made solid products. Its usuage is up to you like many fuel cleaners and additives. Most additives are useless whole a proper decarbonizing is a great thing to do every so often. A decarbonizer usually involves a little more tools than most have on hand.

If they are the OEM ones then the black is only on the inside housing ,so there is no issues of them being legal as the lenses are the exact in colour and size just replace the chrome trim .

As everyone is forgetting the dates i figured i would post this with them in well advance of each event. As everyone is forgetting the dates i figured i would post this with them in well advance of each event. 2006 schedule so everyone knows the dates. Jan 11 west Wednesday *done* Jan 28 east Saturday*done* Feb 8 west Wednesday *done* Feb 25 east Saturday *done* March 8 west Wednesday *done* March 25 east Saturday*done* April 12 west Wednesday*done* April 29 east Saturday*done* May 10 west Wednesday*done* May 27 east Saturday*done* June 7 west Wednesday*done* June 24 east Saturday*done* July 12 west Wednesday*done* July 29 east Saturday *done* Aug 9 west Wednesday*done* Aug 26 east Saturday*done* Sept 13 west Wednesday*done* Sept 30 east Saturday*done* Oct 11 west Wednesday*done* Oct 28 east Saturday*done* Nov 8 west Wednesday*done* November 18th Saturday chicken wing meet at All stars in Richmond hill.*done* Nov 25 east Saturday*done* Dec 13 west Wednesday*****next date***** Dec 30 east Saturday

Too dark to see the rotor surface ,if you have grooves tehn you need to replace the rotors or have them machined depending on the depth. Also need to replace or clean the pads.

ok?

When the brake pad sensor detects wear.

Basically when it leaks or shows a cracking on the rubber.

clean your throttle body

expansion valve vacum is low on the duct work

What is wrong with yours?

If they only unplugged them at each corner then just reconnect them again.

All toyotas shift slowly until warmed up it is a safty reliability control.

You would be suprised btu any locksmith can cut a lexus blank with another key as a guide. Also i had a hard time programing the security part of the transponder for the key but the keless entry worked on the first try. You may have 4 keys already programmed into the car which is why it would not take, there is a procedure to let the ecu tell you how many it has in memory. If it has 4 already they you need to have a dealer program it with the handheld scanner.

You will have to buy a whole new center cap to get the emblems.

From other what? For the last time Erix you do not have a projector made for HID's.

There is going to be no way to adjust the beam pattern to not have the shadow . The projectors you have are just not made for HID bulbs to work efficently . Changing to a different manufacture will yeild the same results as all bulbs will be longer than the halogen ones.

How where they disconnected?

I wasn't saying the vibration was normal infact it should have none wooden steering wheel or not. That sounds like a load of BS from the dealer saying it is normal to vibrate because your wheel is made of wood. Also not sure what kind of tech needs to contact a master tech to find out about a filter being plugged.

If you have a vibration then you might need a wheel alignment or your brakes cheked. The only way for a fuel filter to be bad is for you top have been going to bad gas stations causing it to clog which Lexus cannot control where you buy gas. The low tire is odd but may be related to wheel balance if a wheel sensor was damaged. All sounds like a normal part of driving to me but i may be missing something.

It is a bit cold here in T.O but not that bad. It also has only started with when it got cold that it did not return to fully released.

Well as i was browsing the web i noticed in Japan which i knew had rear seat adjustments as well as an option of 6 buttons for factory options . Well i found out what atleast 5 of them are. From left to right on a 95-2000 LS400 trac/vsc , front headrest drop down , front seat forward/back , rear heated seats , rear seat forward /back. I find this hilarous as the driver and front passanger do not get heated seats . Here's a pic

So any one check theirs? I noticed if i open a door the sensor knows right away and will increase the fan speed to compensate the rush of cold air being ingested. Also when it is on heat ,when the cabin finally gets warm it no longer gets cold as the dirt around the sensor is not holding heat like a blanket making the cabin cold again.

My return shock seems to be dead as it never fully pushes the pedal up all the way after i pull the release. It is not a sticking cable as i can lift it up easily by my foot without any resistance. So my question is ,has anyone had to replaced theirs or even knew it was not a spring like most? It seems to cost about $50 for this stupid shock which seems high but i would rather replace it than have to buy the rear parking brake shoes need changing.

The large shadow in the center of the beam is from the bulb being too far forward in the assembly. Try holding the base and pulling it back and you will see it focus more centered. There is no way to adjust them as the HID bulbs are longer and focus differently.

I have to agree calling anyone a idiot is not a very nice way to make a post.