AZ Mike Posted May 25, 2009 Posted May 25, 2009 Apologies....tried using the search, but with the new search format, I could not seem to limit it to a specific model. I am looking for the manufacturer recommended lug nut torque for a '99 LS. Thanks, and happy Memorial Day!
steve2006 Posted May 25, 2009 Posted May 25, 2009 Hi According to the driver's handbook they should be torqued to 103N-m/10.5kgf-m or 76ft-lb.
Lucky13 Posted May 26, 2009 Posted May 26, 2009 But you arent going to run the Cocacola 600 in it so just get em tight. Dont wory about perfection.
17LexusOwner Posted May 26, 2009 Posted May 26, 2009 Their alluminum wheels right? put em at 100 ftlb steel than put em at 90 ftlb or else just take that nifty impact and zap em down till their tight. who cares!!?
curiousB Posted May 26, 2009 Posted May 26, 2009 I just had to have front rotors machined due to an overzealous tire store employee with his trusty impact wrench. You don't need absolute precision but nut to nut variance should be low. Only way to get that is with a torque wrench. If you use an air wrench then at least use a torque limiter http://www.harborfreight.com/cpi/ctaf/disp...temnumber=92890 (but better to do by hand with torque wrench in my mind).
AZ Mike Posted May 27, 2009 Author Posted May 27, 2009 I use a torque wrench. Just needed the torque spec. Thanks.
billydpowell Posted May 27, 2009 Posted May 27, 2009 I use a torque wrench. Just needed the torque spec. Thanks. yep, I'm with you... no need to over-do
PureDrifter Posted May 28, 2009 Posted May 28, 2009 Their alluminum wheels right? put em at 100 ftlbsteel than put em at 90 ftlb or else just take that nifty impact and zap em down till their tight. who cares!!? wow that's probably the worst wheel torque advice i've ever read in my life. please disregard this guy, you'll end up warping your brake rotors and/or snapping a lug nut. regardless of steel or aluminum you don't generally need >80 ft/lbs of torque on the lugs, ESPECIALLY on these cars given that they're hubcentric.
jcrome04 Posted May 28, 2009 Posted May 28, 2009 Yeah lol. Like letting the rain wash your car? hahaha 76ft lbs IIRC
SRK Posted May 29, 2009 Posted May 29, 2009 Their alluminum wheels right? put em at 100 ftlbsteel than put em at 90 ftlb or else just take that nifty impact and zap em down till their tight. who cares!!? Sober up before posting OK? That advice is not only stupid, it's dangerous.
eatingupblacktop Posted May 29, 2009 Posted May 29, 2009 ... who cares!!? Obviously AZ & everyone else here. If you're not posting to help out ... then ... ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now