dcfish

I agree, If it's under warranty bring it in and let them figure it out while you drive a nice new loaner.

Your RX came without a cd changer ? Would you consider a factory changer to keep the lexus integrity ? I have the complete install with the new glovebox parts needed to install the changer. I also have photo install instructions and location of the hidden cd changer plug found behind the glovebox. Its all wired ready to plug in.

I think the woodgrain looks fine Not to bust your chops, But the new deck looks out of place like a deer in the headlights. It's your choice so I respect it, But ???? Hmmmmm !!!!!!!!!

I beleive 92-96 fits. Why do you want to replace your seatbelts ? Cluster ?

Has the sensor been replaced/checked ?

Hope this helps... HEADLIGHT_AIMING.pdf

Obsessed :chairshot:

http://www.luxurymods.com/index.asp?PageAc...OD&ProdID=4 Tell LEO I sent you. He may give you a break ???

Storm

Nice job Is there a remote sensor ?

I know that there is 3 screws on top and 2 screws on the bottom that hold the glove liner in place. If my memory serves me correctly you have to disengage the glove door hinge to get at the 2 bottom screws. Don't hold me to that. I do know it is a straight forward job and takes 5 minutes. How is the phone mounted ?

First of all clean your glasses or change your contacts Then follow the instructions in this file: You owe me a beer HEADLIGHT_AIMING.pdf

I still have the lcd's with photo install instructions if your interested.

Lightning

Wrench

Check the oil dipstick, If it is overfilled drain some out or bring it back to the toy dealer. It's a no brainer :whistles:

I hope this helps... 1) Remove two screws at leading edge of door panel. 2) Lift front edge of control panel.2) Pull forward releasing rear latch. 3) Remove connectors from control panel. 4) Remove screws along bottom edge of door panel. 5) Remove two screws inside pocket cavity. 6) Pry center insert from door open cavity. 7) Remove exposed screw. 8) Pull upper door panel from door. 9) Disconnect courtesy light connector. 10) Disconnect door open handle cable assembly and door lock cable assembly.

thanks Brakes aren't my strong suit, Someone will chime in with an answer. ;)

Welcome aboard You'll find plenty of info here and don't be afraid to ask........

Here you go........... You owe me a beer gs300_plug_replacement.pdf

Power steering pump ? Is it just the pump or high and low pressure lines also ? What exactly will be shipped ?

Jet

IS_LPS_PERSONAL_SETTINGS.pdf

Driver

Entertainment