Can Anybody Help Me Program My Remote Key

[fyounes]

skperformance,

the code on the key is:

FCC ID:HYQ1512A

I BOUGHT ON EBAY. ALTHOUGH THE ORIGINAL MASTER KEY HAS THE SAME FCC ID.

[fyounes]

bbsal,

What do you think????

[bbsal]

thats not the right remote for your car.the fcc# should be HYQWDT-B not the 1512.the 1512 is just a remote and the one you need has the button on the side of the key and the model number is HYQWDT-B.thats why its not working for you.check on ebay and you can find the right one.

[fyounes]

this one i have has the button on the side,

and the master remote key has the same FCC id 1512 A

[bbsal]

does the master key have the button on the side and also does that one work the alram?

[SKperformance]

like i mentioned before

the car is saying it doesn't mathc even if it is printed worngly and matches in #'s

i don't think the car will listen to you you if you argue with it

lol :D

[sush1a]

actually the procedure is made to resync your key with the alarm brain

not add a new one

as from the manual

" open the drivers side door, others closed

using the door lock control switch

perform " lock , unlock " operation 10 times within 30 seconds

keep each state for about 1 second

less than 2 seconds after performing the above

continue to press the transmitter switch for 10 seconds

does nothing

if it locks 2 time the codes do not match the rom and ecu

3 times transmitter fault

hi, I tried that procedure, after doing it, the door locked and unlocked once, and thats all, what does that mean? Thanks.

[SKperformance]

once should mean it works fine

are you having problems ?

to fyounes

sorry i have to many threads to check to replay to all

but has the remotes ever worked on your car?

i might ponder to say there is a problem with the set

and your only option is the dealer and get a new ecu chip and 2 keys to match f you wan t it to work

sorry there is no short cut as the double lock tells you

it sees the remote but since it does not match what is inside the ecu it will not respond to it

[sush1a]

well after it locked then unlocked, what else do i need to do? i tried locking the door and close it then use the key remote to open the door, but it doesn't respond.

[elazar]

Hello,

I have a '94 ES300 which I got without a remote or a remote key. The key that I use is just a regular key. I know the car has an alarm though(set it off a couple of times, and it has the volume control for it next to the mirror control). I was wondering how I would go about getting a remote for the car. Would an aftermarket remote from Autozone work, or do I have to get a Lexus OEM remote? If someone could enlighten me on this, it would be much appreciated.

Thanks,

Elazar

[crazyhorse425]

hey ppl,

i just got a 96 es300, and bought this remote key from lexus-parts.com, fcc id hyqwdt-b.

however, i was unable to program the key by following bbsal's procedure.

after the steps, i heard beep (door locked), and beep beep (door open) twice instead of just one "beep".

i tried pressed buttom simutenusly, still not working. holding the buttom, obviously not working.

wut should i do when i get to the beeping part since its more than one beep?

[gsgas@adelphia.net]

I bought a remote key on ebay for my 93 ES300 , i read the topic an d i followed the instruction given in a previous topic, like turn ign twice . lock un lock dorrs, 5 times...i did that and i was suppose to hear a beep, but i never did. does anybody know how? thanks

←

Try turning ignition once not twice-it worked for me. gsgas@adelphia.net

[The1]

actually the procedure is made to resync your key with the alarm brain

not add a new one

as from the manual

" open the drivers side door, others closed

using the door lock control switch

perform " lock , unlock " operation 10 times within 30 seconds

keep each state for about 1 second

less than 2 seconds after performing the above

continue to press the transmitter switch for 10 seconds

does nothing

if it locks 2 time the codes do not match the rom and ecu

3 times transmitter fault

I know this thread is from years ago but im just havin this problem. After i did the steps the car beeped once then after a short pause it beeped again i held the button on the key but it didnt do any thing. Am I doing this right or what can someone help please

[The1]

bump...

[The1]

bump bump help?