DaSwede_420

Ya I found a local shop (Exotics INC) to refab my Y pipe with an electronic bypass, still in the shop.........waitin for the price :(

you got any pics?? i'm lookin for a clean setup....... ;) thx

slobby http://en.wiktionary.org/wiki/slobby :P

I was thinking about going with the Flat mounted sub, but i'm willing to build a little box if its worth it.... Pioneer TSSW251 Shallow Mount 10 Inch 800 Watts Subwoofer http://www.amazon.com/Pioneer-TSSW251-Shal..._pr_product_top anybody tried this?? it was recomended by my mechanic... any info appreciated :)

uhh my bad, i guess we're not on the word Lexus anymore ...... we're on ICY?? I think of "Slippery"

i think.. PIMPIN!!! (Due to the fact that I'm driving a sixty thousand dollar car with plush leather seats, and clean interior combined with 420hp= driver gets laid)

the elemental designs setup looked good in the pics, but i wanted to try the new free air Pioneer TSSW251 Shallow Mount 10 Inch 800 Watts Subwoofer http://www.amazon.com/Pioneer-TSSW251-Shal..._pr_product_top anybody tried this?? it was recomended by my mechanic... any info appreciated

Nitrogen aside, anybody know of spraying tires with WD40 for better grip?? i've heard of using clorox to clean tires and then apply something for better "stickyness? any ideas??? p.s. I did the wd40 and do think it gave me like 5% more grip and the tires were more quiet when drifting.......... :P :P

I've got a similar problem on my 1995 GS300, I unhooked the drivers side door "indicator" so i could have the door open and it wouldnt beep while listening to music. Key got in washamashine(thanks to wife) and the dealership said it would be 477.00 to replace a door latch? i have the new key from the dealership, they said they just can't program it cause of the latch being disabled????, can i just take the latch sensor off another door and then program it?, becausethe remote locks & unlocks fine without the latch "sensor" on the driver side door ,you just need that to "program a new key". Any ideas very appreciated!!! :P PEACE!!!

Anybody installed Cams in their GS?? I want to do it myself but i dont know if i can find the time, how much is a fair price to pay to get them installed? ps. I dont suppose there is a guide online, i was just going to use the AllDATA software to guide me. THANKS!! B)

Is it worth 650 bucks for stage 2 Crower 264 Cams? Anyone used these cams or know where to get them cheaper or are there better stage 1/2 cams out there for the money? some specs on them: CAMSHAFTS - STAGE 2 (Toyota/Lexus IS300/GS300/Altezza - 2JZGE) Camshafts designed for Stage 2 applications. Slight lope at idle, does not require aftermarket valve spring. Mild tuning recommended. Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK. Part Number: BC0311 Adv/Dur: 264°/264° THANKS!!!

anything aftermarket will have an effect on your car, good or bad, run it for a while, if you have problems it's prob just a sensor or ECU that needs to be tuned. never know tiill you try! Good luck. even tho research shows that stock intake is best........

I've got a 95 gs300 and I'm looking at spending 250 bucks on some new MAGNECOR KV85 8.5MM SPARK PLUG WIRES. anybody know if these are just a waste or what? i dont have anything done to the motor but i plan on upgrading things soon(ignition and cams,exhaust) should i get these or just the basic stock ones? Basic stock ones. the 8.5 only relates to the total diameter of the insulation, not any other part of the wire. There are 8.8's made by Accel for hot rods but they run 60KV coils and arcing is a problem. Just go with OEM rated ones and save your money. B) Thanks for the advice, im going to try new plug wires next, i just flushed the tranny and it still hesitates sometimes. what's a good aftermarket ignition coil to buy and where? THX!!!

B) Hey guys! I've got a 95 GS300, only mods are tanabe DF springs and K&N. and 2 amps 150watt for the stock sub and a 400watt for the other speakers. I'm 2nd owner, bought it in TX for 4,000. It currently has 218k miles. I've replaced the alternator one 2x since there is a lil oil leak that drips on it, but i replaced it about 6mo ago. I just got a quick question about the RDI fuse, its for the radiator obviously and iits blown, like melted the plastic housing pretty bad. Anyone had problems with this before? I did research and shouhd i check the coolant temp sensor since it controls the radiator fan?? I think this is related,since the coolant temp switch and AC high pressure switch control the relay. When i have the AC on, and floor it, SOMETIMES, the AC light blinks and doesnt work. but a few min later it works.... BTW i drive her HARD, like over 130mph daily to work, but i do let her warm up slowly and use good gas etc ;) Any advice is appreciated, i tried to search RDI fuse here but the retarded search makes u search over 4 charachters.... cheers!!!

ya I get about 24ish with AC on, i removed spare tire, and have the K&n filter, new iridium plugs, cut off the heatshields for headers and removed the stock amp from the back. i'm kind of extreme when it comes to weight. no change, no mats, just me! :D just cut off whatever u dont need with a grinder! lol

Not in NC or SC, truly depends on state and cops moods/amount of doughnuts eaten in that given hour. there is a formula for that somewhere......

I've got a 95 gs300 and I'm looking at spending 250 bucks on some new MAGNECOR KV85 8.5MM SPARK PLUG WIRES. anybody know if these are just a waste or what? i dont have anything done to the motor but i plan on upgrading things soon(ignition and cams,exhaust) should i get these or just the basic stock ones?

NIIIIIIIIICE BRAVO BRAVO!! does it sound deeper at idle??

bike wreck shattered kneecap. and i got drunk with guys from work and got the tat one fri in TN. cause tat parlors were illegal in SC life's crazy!! ;)

lol, didn't think i'd see this post on here, actually some chics do think i'm a wealthy when I say i've got a lexus.....and yes in college i did get some from my ex in the lex lol! tha rhymes, ex in the lex!

If you've got a grinder you can just grind off the old bolts and buy new ones for the new exhaust............just be careful of sparks and ur eyes and the gas tank.