LRP_LS400

I have the same problem on my 92 LS, If I only Plug the two lines (the one on the engine and air intake part) will this eliminate the "white puff" when starting the engine? eventually (a week or so) I'll try and get the ACV replaced. is there anything else I should consider? thanks.

i'm having the same problem. keep us posted

what specific Pb blaster products should be used and how?

me and all of our friends have been voting over and over since this afternoon

Red Bull is holding a competition. It's called "Red Bull Art of the Can" and basically, you make anything you want out of a Red Bull can. Before he passed, my friend's dad made a Jet Fighter Plane and a Bi-Wing Plane. (for some reason, the Bi-winged plane isnt on the Website.) Directions to the Voting: Go to: www.redbullartofthecan.com Click on: "Find out more" Under the Atlanta Art of the Can Click on: the "Gallery" tab His will be the 3rd one titled "Air Race" Vote for him! And if you wanna vote again... just refresh it!! And vote again! Thanks to All!!

thx

to answer my own question. the jdm bulb size is H4 so in order to have them fit an adaptor is need to conver the 9004 harness to H4 bulb.

http://www.lexls.com/tutorials/body/shifter.html

old post, but can anyone tell me where and what to "plug" pic would be appreciated.

does anyone know what type of bulb is used for the jdm one piece headlight? i just installed the jdm headlight and i'm using the stock bulb 9004 and the light output is horrible; i cant see more then 7-8feet infront of the car. any info is welcomed. thanks

if you are talking about those lights then check out http://www.lexls.com/tutorials/lighting/cl...cklighting.html if you are switching out w/ Leds you have the option of changing the backlighting color. like in the pic above kits with the pocket for aftermarket headunits and harness can be purchaed one ebay just do a quick search

is this what you're talking about w/ new leds, you will have to take apart the center dash part and switch out the lights

Yes; the prongs "snap" on and stay on with the sticky tape

yes, the "L" and "lexus" on the back have prongs

i replace all of my worn out gold ones last year, the one in the grille is held on by one screw and one tab on each side, the "lexus" on the trunk has 4 or 5 pins i believe, the "L" has pins also, and the "ls400" is held on with just tape. for the front L, rear L, "lexus" and "ls400" costed me 150 from dealer, but i think you can get them off of ebay for much cheaper (just read the description carefully)

how may gallons it is at the halfway mark? is it 10?

do you like the pussycat dolls? LoL

just installed kenwood kvt-617dvd.

try do a search on ebay.

anyone have experience with remote start alarm systems? I'm thinking about installing one in my car but I don't really have much information on them? What brands should I look into? Is installation very difficult? I can wire up car audio stuff and is alarm installation similar? any info will be greatly appreciated.

i agree with the above statement

take a look at http://www.lexls.com/tutorials/audio/subwoofer.html

use low guage wire to help the increase in power need to your amps, I'm an oldschool rockford junkie so i would recommend a rockford fosgate 601s, I have one in my LS powering 2 JLaudio 12w3v2 and it is plenty enough power. you can pick one up for less then 300 on ebay.

i tried contacting that guy but no reply yet, my interior is the charcoal grey. thanks for the help guys, i'm just in desperate need of a new seat from the picture do you think its really brown like described or does it look some what grey?