Jump to content


camlex

Regular Member
  • Posts

    1,072
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by camlex

  1. Hello, I bought gaskets for EGR (Upper and bottom). For the last 12 years I have never touched it. No codes, but I'm thinking about cleaning it. I think I have an idea of how to open the top and bottom. Are there any other connections that I'll have to disconnect? How to clean? And is it a good idea to clean the EGR? Please advice. Thanks,
  2. Interstate makes good battery. 4-5 years in texas if person maintaining acid level by adding distilled water.
  3. I will replace tomorrow. FYI I do change PCV every 15,000 mile, which falls @ 355,000. I think i am at 352,800. Thank you.
  4. Thanks, I like the steel plate (pan) idea. Since engine runs so good, i really don't like add any other then oil. Where can i get this plate, and how to install. Thanks,
  5. is it safe to use Lucas? Looks you are very experience, guide me to get best result. please share. Thanks,
  6. Presently, i am using 5W30, If i switch to 10W40, Is that helps? Thanks,
  7. yes, 352K with original engine and trans, only one thing i changed was PS pump @ 130K with after market. None of my car has any kind of leak and i don't like it. But as you explain with these many miles, i will continue driving and keep eye on oil level. Thanks,
  8. Hello, Finally, my ES300 give up at 352,700, i saw oil drop on driveway. with inspection, I saw oil under engine where trans. & Engine joint together. not really bad but one or two drops. Any idea or suggestion will be helpful. Thanks,
  9. Best things to do is take it to the good mechanic who do nothing but front end.
  10. Pictures as I promissed, Since these after market bulbs are 3 MM, remove socket from board and solder bulb direct to board. Hope that helps. Thanks,
  11. http://www.autozone.com/autozone/catalog/p...rentId=cat10007
  12. You are welcome.They are good. Have a good weekend.
  13. After opening Ashtray, I did recover my 9MM socket. I will post pictures of old bulb, sokect and New bulb. Thanks,
  14. Finally those bulb arrived yesterday. 0.20 a piece +8.95 shipping i did order 12. That was not that hard, i did replaced 5 bulb. as lexucan mentioned " With the radio off, the backlight around the big Power/Volume knob should light up, plus the AM, FM, TAPE, and CDcdm buttons. Oh, and also along the opening for inserting a cassette tape. " all buttons lighting up again. Only bad thing happened, was lost one socket behind ashtr./ lighter. How to recover? Thanks,
  15. ES300 wheel torque is 80#. Most garage use 100-110# air. Correct me if i am wrong.
  16. Three brake job is Max, Rotor needs to change.
  17. It's may just timing, did you ran in to water when rotors were hot. or Mr. Walmart, Let's fix it right. Safety.
  18. I have been using Wagner rotor with Thermo quite pads for longtime. I am happy.
  19. Southwest Alignment Svc Inc (713) 783-5282 Ask for Craig.
  20. http://www.superhonda.com/tech/wheel_weights.html 18 Lbs per this chart + tire
  21. Hello, Today I finished 352,000 miles on my great ES300. I did promissed somebody that i will post some images. Today was the perfect day. This car engine has everything original except PS pump which i replaced ~@130,000 with after market. Any inputs will be helpful to keep me safe. Thanks in advance.
  22. Should be Thermostat on inlet side of Engine?
  23. Thank you very much.. what about below big Power/Volume knob, there is other one button for Cd track / forward
  24. Bump
  25. people who have original pioneer radio, at night time my radio only light up AM and FM/FM1 buttons.(Radio Off) please check yours and will you please let me know which other buttons in your car lighting up. Thanks,
×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery