Question About Modification

[SON OF SAM]

Will adding an aftermarket intake trigger a check engine light?

[new big400]

Not a good one installed correctly.I reccomend the SRT Ive been running it for 3 yrs no probs.The piggy back ecu is set-up so that if there is a prob it will trigger the check engine light.Good Luck

[SON OF SAM]

Ok thanks for the reply. Has anyone tried the K&N intake kit. Not the filter only but the setup for around 300?

[TurboGS300]

I got the INJEN and it works great <_<

[new big400]

I dont think there is an injen for a gs4

[TurboGS300]

I dont think there is an injen for a gs4

←

GS400 INJEN INTAKE 92-95 <_< LET ME GUESS!!! Now you're going to want it for the 96 and up? :P

[bartkat]

Will adding an aftermarket intake trigger a check engine light?

←

Some intake will do that. It's usually because they relocate the MAF and it gets a false reading, causing a CEL.

[new big400]

I wasnt aware there was a 92 -95 or a 1st gen gs4.Ive never seen one.The SRT comes with a piggy back ecu to correct this prob and let the maf know how much air is really coming in.

[new big400]

So do these really exist?

[kgh31386]

I gotta question, how much louder does an air intake make a car??? Like if my dad drove it normal driving, would he be able to hear the difference?

[SON OF SAM]

So the SRT intake comes with the ECU all for 525 buxs?

[dcfish]

I dont think there is an injen for a gs4

←

GS400 INJEN INTAKE 92-95 <_< LET ME GUESS!!! Now you're going to want it for the 96 and up? :P

←

TurboGS300, G4'S came out in 98 , Just for your information.....

[dbgs400]

I gotta question, how much louder does an air intake make a car??? Like if my dad drove it normal driving, would he be able to hear the difference?

←

I've got a 98 GS 400 with a few mods 1 being the K&N FIPK kit and it works great, no check engine light, improved throttle response, easy to install and yes if your father puts his foot into it he will definetly hear a difference. Depending on the age of your Dad ( I'm 48) well it will sound like taking the top off your old cars air cleaner and turning it upside down on the carb..

[Tenoshii]

overboost.com has the INJEN IS2083P for only $187.20

I have a 94 GS300, and the INJEN IS2083P is the only intake that I can find on the internet for it. I have also read somewhere that I need to to have a modified ECU or a piggyback ECU to be able to use an aftermarket intake. Is that true, or can I just get the above mentioned intake with out any other mods?

[TurboGS300]

overboost.com has the INJEN IS2083P for only $187.20

I have a 94 GS300, and the INJEN IS2083P is the only intake that I can find on the internet for it.  I have also read somewhere that I need to to have a modified ECU or a piggyback ECU to be able to use an aftermarket intake. Is that true, or can I just get the above mentioned intake with out any other mods?

←

I have the injen SRT intake, you don't need anything extra! It will make a difference. B)