Jump to content

TrevC

Moderator
 View Profile  See their activity

  • Posts

    420

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Profiles

Forums

Events

Gallery

Store

Articles

Videos

News & Articles

Everything posted by TrevC

  1. TrevC
    Hi Rick....welcome to the Club Great purchase of a car of that age with only 33k miles on it. Post up a photo of it if you like Cheers, Trevor
  2. TrevC
    Hi John...welcome to the Forum Any questions just ask away, I'm sure some of the members will know the answers Cheers, Trevor
  3. TrevC
    Have you tried using a matt finish silicon spray (dashboard shine) which deadens the glare slightly
  4. TrevC
    HI Nanet.....welcome to the Forum I would think that superficial wear and tear would not be covered by mechanical warranty and as such, there are several companies around that will refurbish wheel rims at little cost.
  5. TrevC
    Hi Chris....welcome to the Forum Fine looking car you have there Cheers, Trevor
  6. TrevC
    Hi Scott....welcome to the Forum
  7. TrevC
    the only other thing is whether the lever where the cables attach is slightly longer which is not allowing the lock to move over enough?
  8. TrevC
    Not sure but if you look in the handbook or even if you can hear where the relay is clicking when switching the air con on and off.
  9. TrevC
    Usually the track is pre-greased and introducing any other substances may just encourage a build up of dirt and grit.
  10. TrevC
    Would be tempted to pull the fuse to reboot the system to see if it makes any difference.
  11. TrevC
    Relay? or something that is being subjected to heat which is causing it to thermally trip-out?
  12. TrevC
    It sounds like tyre(s) to me...either a bulge in one of the tyre tread areas or a static imbalance which would easily be determined through wheel balancing and spinning the tyres to look for a bulge or mis-shapen tread area.
  13. TrevC
    Hi Tyler....welcome to the Club Good to have you onboard Cheers, Trevor
  14. TrevC
    Possibly some linkage not reattached correctly after replacing the handle?
  15. TrevC
    Hi Christian....welcome to the Forum Great looking Lexus! Good to have you onboard Cheers, Trevor
  16. TrevC
    Hi Brian...welcome to the Club Glad you're enjoying your ES....post up a picture of it if you like Cheers Trevor
  17. TrevC
    Hi Brendan....welcome to the Club That's a fine looking car....I wouldn't want to mod it much at all, looks fine as it is Good to have you onboard Cheers, Trevor
  18. TrevC
    Hi John.....welcome to the Club How are you finding the change from the GS to the RX? Good to have you onboard Cheers, Trevor
  19. TrevC
    lol....I know the feeling (about telling the wife) but there is a lovely saying which is 'its easier to gain forgiveness than it is to get approval'
  20. TrevC
    Sounds like the rubber is a bit hard.....maybe hanging around in the parts department for some time? There is a small abrasive tool that you can rub over the blade and takes a small amount of the hard edge off that may help. Otherwise, try a different brand of wipers
  21. TrevC
    hairdryer and a scraper blade should do it
  22. TrevC
    sounds like you are missing a spacer behind the pulley which should keep it off the bracket. Look down the belt run to see if it aligns or if it is offset, this should confirm
  23. TrevC
    With that many electrical faults occurring, I would start with checking the battery for condition....if in doubt, replace the battery but check all the electrical terminals (security, condition) and earth leads first.
  24. TrevC
    Sounds engine related if its only between a certain rev range and not road speed. My thoughts would be a static imbalance on the crankshaft area...crank pulley, flywheel?
  25. TrevC
    Hi....and welcome to the Forum Hope you find some meets on here, if not, you are welcome to organise something in your area. Good to have you onboard Cheers, Trevor
×
×
  • Create New...

Forums

News

Membership
  • Unread Content
    •
  • Members Gallery
    •