Jump to content

camlex

Regular Member
  • Posts

    1,072
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by camlex

  1. Hello, I am going to change the front strut mount on my 97' ES 300. I went to Toyota and got the mount, but previously when I bought the kyb mount they had a bearing, but this time I didn't receive a bearing. I asked the dealer and they said it's part of the new design. Does anyone know how to install it? Do I need a bearing because I'm reading Haynes Manual and it shows a bearing between spring upper seat and mount? Thanks
  2. you can't buy only that peice. you have to buy all(around tire and front. i think you are looking about$60 Hope this help. Part# 53876A Tell toyota to look 9065 P2/2
  3. if somebody read all this, he will be scare to do oil change, its 4-1/2 minit work.
  4. nothing but psychologically.
  5. toyota stealer charge $99 (III Type) Thanks,
  6. if you don't mind to tell us "what type transmission fluid are you using with 265,000 miles car? Thanks,
  7. that is No. 2
  8. Hello, When toyota engineer says use III type why you spend more money and buy something else. still transmission can go fail. but people do.
  9. Hello, Near the front engine mount, there is shock mount. anybody know how to check? Thanks,
  10. so many items there, then strut and mounts. 1. check rear stabelizer bar bushing.
  11. This guy i am dealing with , i know him from 20 years. Very honest and very reasonable. Sure jason is good man, but i am in houston area. He knows toyota more then people who made it. when i call for ball joints to lexus and toyota they were asking for $269+ Part+ Allignment. isn't that crazy? Trust me. He is GOOD. Thanks,
  12. if you remember, not long a go i have some noise problem and you mention ball joints. same time i did asked my mechanic for R&P installed price. He asked for $400, but he mentioned mine is in good condition. If wants in detail, i will follow. let me know. by the way i have new ball joints on my ES300(FYI Total cost $130) Thanks,
  13. Hello, Finally, I replaced ball joints on my 97 ES300. Cost me $ 130 (includes parts)Mechanic told me you don't need to allign again. Other person mention anything you change in front, always good to do allignment. By the way new ball joint makes a differance in steering wheel control. What's your inputs? Thanks,
  14. You lost all power steering fuild, that means you you leak. Where? i don't know look at pump, R&P. If you have change pump Rebuilt will cost you $300 (Including labor) if R&P needs to replace you looking $400 (Rebuilt and including labor) Hope this help.
  15. 1993-96 Models then click on picture. and its shows 1mzfe .
  16. look at this: http://www.autozone.com/servlet/UiBroker?F...23d8013f7b8.jsp click on picture assembly and u will see 1mzfe there Hope this help.
  17. Hello, I am wondering how important to have isulation under hood? mine is breaking a part, i asked dealer for new, price is ~$220. if it is important, then who have better price? Thanks,
  18. Mechanic fix the front fender noise. But still that squeaking noise is comming when i go over speed bump. only thing i didn't change is the shock which is close to front engine mount. I did open top bolts and then try to pull and push by hand. yes it was moving by hand. so my question is: is that normal? Thanks,
  19. That expansion valve cost is $65-70. To install, not a easy job. you need a good mechanic. my brother in law had to change in his Avalon mechanic charged him ~$350 Thanks,
  20. 685.00 Lower Control Arm Bushing & Front Struts & Mounts (KYB) 130.00 Rear Mounts (Parts Only)(KYB) 140.00 Rear Struts (Parts Only)(KYB) 50.00 Labor to Install rear Struts & Mounts 160.00 front and Rear Stabilizer Bushing (Parts & Labor) 125.00 front engine mount 50.00 rear engine mount(Pack in) 45.00 dog bone mount 45.00 Transmssion mount 120.00 Total labor for 3 mount (i put dog bone on it.) ------------ $1550 Hope this help.
  21. As you know, I have 97 ES300. I changed following items. Front Lower arm controller bushing. (Both) Front KYB struts and mounts.(Both) Front stabilizer bar bushing. (Both) and all engine mounts And, still I am hearing some noise comes from front when I go over speed bump.
  22. 214-221-3135 Jason is the name. Call him, he is honest good man.
  23. this sound happen when I hit a bump at 5-10 mph.
  24. 1. 2005 Jeep liberty 2. 2001 VW jetta 2.0 3. 1999 Toyota Sienna 4. The best 1997 Lexus
×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery