Leaderboard

OK, do you know your right from your left? :chairshot: You and my wife may have the same problem. You might have to remove the radio/HVAC control unit to remove whatever that is - I can see only a portion of it ... on the lower RIGHT corner of the photo. Does this "thing" look like a bracket that is inserted between the radio and the upholstered console "rail"? If it is, it is probably held in by one or more self tapping screws. I've used brackets like I am talking about to hold phone cradles and GPS units a bunch of times. Removing the radio/HVAC control unit requires first removing the center vents and the console wood. I don't think the center vents are held in by clips like the 95-up but look into the vents to see if there is a clip on each side. These vents are easy to break and expensive - $300+ The console wood can be CAREFULLY pried out with a plastic non-scaring trim removal tool - a putty knife or regular screw driver can also be used but tape up the blade to prevent scratching the wood. I almost forgot, the 90-94 has a separate ash tray unit that has to be removed - how to do that will be obvious once you have the console wood panel out. The radio/HVAC assembly is held in place by four 10mm bolts - two top, two bottom. You will see them once the vents and wood are removed. Don't drop the bolts when you remove them - you might not be able to recover them.