Jump to content

I Dont Need A Buffer ... If I Have Klasse


Recommended Posts

Hey ladies and gents..

I called the people at Klasse and they stated to use microfiber towels.

So do I need a buffer and the 1-2-3 process?

I suspect the buffer is the best method to strip the crap off of the car and put on the good polish?

Right now I am going to buy the 4 pads, backing plate, sonous 1-2-3 and the buffer.. Does this sound like the way to go?

Cheers to LEXUS!

Link to comment
Share on other sites

Hey ladies and gents..

I called the people at Klasse and they stated to use microfiber towels.

So do I need a buffer and the 1-2-3 process?

I suspect the buffer is the best method to strip the crap off of the car and put on the good polish?

Right now I am going to buy the 4 pads, backing plate, sonous 1-2-3 and the buffer.. Does this sound like the way to go?

Cheers to LEXUS!

A RO buffer is not absolutley necessary but it makes the application of a polish easier and more efficient, applying a sealant with a ROB ensures a thin even coat , which is difficult to obatin by hand (difficult but not impossible)

Buy as many MF towels as immediate funds allow (you can buy more in time)

Same goes for the foam pad 'starter kit'-

Foam Pad Starter Kit:

•1-Light Cutting Pad (Orange)

•1- Polish /light cutting (Green)

•2-Polish / Waxing Pad (Blue)

•2-Finishing Bonnets

•1-5-inch DAS FlexPlate Urethane Backing Plate

•Use speed # 4.5-5.0 for machine polishing

Autopia uses the above colours for their Autopia DAS Sonus Foam Pads

JonM

Link to comment
Share on other sites

The buffer also makes removing defects and swirls a possible task.

Correct.

It also saves your arms the next day!!

Seriously, The PC 7424 will give outstanding results almost unatainable by hand.

The way the paint looks after polishing and applying the Klasse with the PC will be amazing.

Look at my post on the review of the new polishes.

You might not need all three polishes, but just look at the finish of the black paint.

Oh this is just polishes and has no wax or sealants on it!

New Sonus SFX polish review

Link to comment
Share on other sites

Not with something like a PC, you can definately be too aggressive with a Rotary but the PC doesn't generate much heat and you'd be very unlikely to harm the paint with it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery