What Are Those 3 Buttons...

[DENN!S]

just before the windshield? Are these kind of "program anything" kinda buttons or is it just for garage door openers?

thnx,

Dennis

[GS300SportD]

You can program anything that has a remote --

Gate at the entry to you community,

Auto on/off light controls for inside or outside our house,

Gate to the parking garage at work, and of course

your garage door at your house.

Hope this helps

[DENN!S]

thnx, how do i go about programming "it"

[SKperformance]

I take it you don;t have an owners manual for your car?

go to lexus.com and register your car and they will send one to you for free.

it is rpetty easy to program you need to know if you have a rolling code transmitter opener or not first

[BA_GS400]

I take it  you don;t have an owners manual for your car?

go to lexus.com and register your car and they will send one to you for free.

it is rpetty easy to program you need to know if you have a rolling code transmitter opener or not first

←

I've had my car for over 16 months and just noticed this the other day! :) (too fascinated by NAV I guess)

Programming is easy:

1. Hold 1 of the 3 buttons for approx 45 seconds until it flashes at you. (keep holding)

2. Hold the garage door opener or similar device WITHIN 1 INCH of the 3 buttons, then hold your opener's button down firmly. Keep holding both buttons!

3. Within a few seconds (5-10), the Lexus light should flash faster. At this point it is now programmed with your old remotes' code. Release both buttons.

[DENN!S]

thnx SKperformance, i will register. what if i have a rolling code remote for the garage, what do i do then???

BA GS400, thanks lots

[1990LS400]

There are lots of past posts on this issue. Look at this one and/or search for "Homelink" for other posts:

http://us.lexusownersclub.com/forums/index...052&hl=Homelink

[DENN!S]

thnx