white ice Posted November 22, 2004 Share Posted November 22, 2004 my clutch is starting to get a small whine when i the car is idle and my foot is off the clutch. when i press it in the noise goes away. i was told that it is most likely the throwout bearing. i was reccomended to change everything. when i change it should i stick with the OE clutch or should i look into a performance clutch. if anyone comments on the performance clutch. what should i go with? Quote Link to comment Share on other sites More sharing options...
jzz30 Posted November 22, 2004 Share Posted November 22, 2004 it depends on if you plan to mod or not, but if yourjust going to keep it stock then i would just buy an oe set up unless you like a particular clutch from past experiences, like i like ACT for example because every car i have driven with an act clutch grabs closer to the floor but the peddal becomes a bit stiff. so driving in trafic kind of sucks. but most likely you will have the least problems with a oe set up, and dont forget to get a pilot bearing and have the flywheel resurfaced. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted November 23, 2004 Share Posted November 23, 2004 get an exedy clutch it is oem but without the Toyota price Quote Link to comment Share on other sites More sharing options...
.jpg.00b008f265e99d7d6120b5e549b3fd10.thumb.jpg.19472090d3f0c8af2c0ed917c349221d.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.