camlex

Reason we write "HISTORY", so we can learn from it. may i ask What was the reason for ban?

Hello, Cold car starts with high rpm and put in Drive sound like you have weak or broken dogbone mount.

CV joint?

you wrote this "The panel shows that its on but no air comming from the vents? " A/c Heater blower fan please look your manual they will show all location for each fuse. Hope this help.

check fuse for fan if you don't feel any air circulation

$400-450 is good price. This is NOT an easy job. \ \

oil plug gasket 90430-12031 transmission plug 90341-18016

Hello, This is not lexus related question, but we have good experience people may be give me some idea. 2001 VW Jetta(I never liked it): This Peice of Art has 23000 miles, runs good, but sometime when you driving in slow speed(30-40MPH) it's stalling in another words like braking, i took it to dealer they changed brake booster and temp sensor. Total bill was $650. Yesterday same thing happen again. What could be wrong? When it's stall, it's never die completly, they also put on computer no error codes. I am taking this peice of Art, back to dealer tomorrow. VW don't have service advisor ,they have service writer. Please give me some idea, so i will tell writer to write on service ticket. Thanks,

Hello, It's good to hear that you work for Sears because those are the people who discovered that the wheel was bent. What he was saying was that the alloy wheel is higher then the spare steel wheel (full size) and you can't put the bolt on top of it so the wheel can stay in place without making noises. But as you adviced I will check on it patiently. Thank you very much

I got it. Sears checked it. Perfect condition. Job has been done. Thanks to everyone for their inputs. Sears guy was telling me that other little bent i cann't put it in truck. Bolts not fit. Something? Why?

That's regular full size steel wheel. It's don't match. I called junk yard he has it and can sell it for $100. I am thinking to get it. and leave bad for spare. Thanks,

Hello, these are 'factory original' wheels. Its looks good but when they put for balancing ,looking side of the machine you can see up-down rotation. Thanks,

Hello, You have very good thought.but I don't want to write to long so i didn't mention, Yes first i went to sears and then i went to discount tires. Both informed me same results. Thanks,

Hello, I just stop by to rotate and balance my tires. and i find out that one wheel is bent. Please help me to make Decision: should I just buy one used wheel($100) or go and buy all four new wheels? if you think that i should buy all four new then i have to buy 15" wheels, because i just changed all four michelin tires. Which one is good looking and looks perfect on Lexus? Need help. Thanks,

Hello, Thanks for help. I measure both front doors (window length) Both are same. Also i notice my driver side front door is 0.15" lower then real door which is next to when you close front driver side. Passenger side both are in same level. I hope, you got the picture. and one more question: How to open side panel ? Thanks,

I don't have frame around window. and i try to push door frame but looks it's in right position. If i lower liitle window glass then it's no problem . Buy go to the end (closed position) it's hit the frame. Thanks,

Hello, It’s kinda technical question, When I closed passenger side front door, glass hits the upper body molding. How to fix this? Thanks,

Safety should be first. I don't know what HID makes differance. Or you driving only at nights. Good luck.

In order to program the new remote, we: 1. opened the driver side door and made sure the key was out of the ignition 2. inserted the key into the ignition and removed it without turning 3. using the power lock, we locked and unlocked 5x 4. we closed and reopened the door 5. using the power lock, we locked and unlocked 5x 6. put the key in the ignition and turned it to the on position then turned it off and removed it 7. after the locks cycle (the car did this itself) we held the lock and unlock button simultaneously for 1 sec 8. we held the lock button for 2 sec The problem arised after the locks cycle. We saw that the locks cycle occured and when we held the two keys simultaneously, we heard another cycle. Then we held the lock button for 2 sec but nothing happened. THen, when we tried to use the remote, it didn't work. Any ideas as to why it didn't work? THanks.

Very good info. Thanks,

look at fig.2 click on it and see http://www.autozone.com/servlet/UiBroker?F...23d8013ea5c.jsp Hope this help.

i don't know how to post picture. i saved your picture and draw arrow to pcv location but looks to me i don't know how to post. please tell me.

pcv is on rear valve cover close to arrow

Hello, I did research and I found some notes here and there but I got lost. If somebody knows the method for programming a remote for a 97 ES300, please let me know. I would really appreciate it. Thank you.

FYI I have 99 Sienna @87000 I did transmission flush @30K ,60K and i will do it again @90K with III Type. No problem ....