Leaderboard

You most likely need to replace the starter; less likely the wires and connections between battery and starter. Even less likely but possible, the ignition switch. If this has the original starter that came with the car, no doubt that's it.

91 400LS. Am still experiencing same Brake issue. After replacing right front Caliper and both front rotors, new pads, things worked fine for about 1000 miles. After that period, the front wheel with the new caliper would start heating up, i.e. braking. This would happen every now and then until all 4 wheels would start braking fairly hard (all 4 wheels showing same amount of heat) without Pedal input. Opening Bleed valve depressurized system and confirmed on Hoist. Also, letting the car sit for 10 - 20 minutes will free them up. Disabled the ABS, bled the system, same still. Rubber brake lines replaced years ago with the braided steel type. Am certain no cross contamination of bona fide brake fluid ever took place. Talked with the Lexus Tech to no avail. Anybody else found the cause/fix for this? Thank's all.

What do you mean? Are talking about adding puddle lights? I would wire them to the light-up ring around the ignition. It goes on whenever the doors are unlocked, when the doors are open, and fades out when they're cosed. When i had my Rx300 i added light-up door sills and tapped off of the ignition key ring bulb which gives 12V and plenty of current.