o6 is250 rwd Stuck in 3rd Gear p2714 P2757 Gs300 A960E Transmission Torque Problems TCM Calibration?

[jehmin]

Car stuck in 3rd gear and stuck in limp mode. Had an initial torque converter problem

May have been fixed with SL1 and TCC solenoid replacement. But still stuck in 3rd with a new code went from p2757 to P2714 and still have P0761.

Might also happen with a 2006 GS300 with A960E transmission

Has anyone had this issue or ever get a TCM or ECU calibration update?

[Lexus_DK]

Possibly a bad shift solenoid, or transmission is going out.

[jehmin]

On 4/23/2017 at 9:28 AM, Lexus_DK said:

Possibly a bad shift solenoid, or transmission is going out.

Do you think you might have a part number?

I honestly think the shift solenoid is good as iv checked the resistance and cleaned it back before install.

I need to check the line pressure and the SLT again

[tnav]

Just checking in to see if you found a solution. Please share if you did. My 07' IS350 is doing the same thing. Thanks.