TerryMac

Low Washer Fluid Warning Won't Go Off

Recommended Posts

Warning and light will not go off even though fluid has been filled. Searched Google but no one has the trick yet. Thanks.

Share this post


Link to post
Share on other sites
 

The "level warning switch assembly" has likely either failed or become disconnected.  Accessing it may require removing or loosening the right front wheel well liner and/or a under-cover. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By JennaH
      I'm new to the Lexus experience, having recently puchased a pre-owned 2008 RX400h with 28,000 miles. I am well pleased in general; however I find the operation of the remote key fob to be rather disappointing. The range of the remote key fob seems ridiculously short--I tested this and found that at best (no trees or other obstacles between me and the car) the distance in which it will lock/unlock/Panic is about 4 to 5 car-lengths. One key seems slightly better than the other but neither is worth a darn. I finally bought a new CR2016 battery and with some difficulty installed it in the "weaker" key, but there was no improvement. That key still has a shorter range than the other and often requires multiple presses of the Panic button before anything happens. With either key the Panic operation is less than ideal--unless I'm within a few feet of the car, all that it usually does is just "beep" and that's it. Is this "normal" for Lexus? Any suggestions would be very much appreciated, thanks in advance!