Jump to content

Wiper Auto Setting Not Working


PJA41

Recommended Posts

I read there is a sensitivity setting for the automatic wipers but I cannot locate it. Does someone know where it is and if it could be why the auto position does not activate the wipers?

Thanks

On my RX it is a ring near the end of the windshield wiper stalk. You turn it one way for less sensitivity, the other way for more. (The ring is a little like the ring on the lights' stalk, for the fog-lights.)

Link to comment
Share on other sites

I read there is a sensitivity setting for the automatic wipers but I cannot locate it. Does someone know where it is and if it could be why the auto position does not activate the wipers?

Thanks

On the wiper control arm you should see the word 'AUTO' printed on a collar that rotates and aligned with four incrments from '-' to '+'. I leave mine set on the third setting from the '-' which makes it slightly more sensitive but not at maximum sensitive. Also, I have to move the level to the second position for the auto wiper feature to engage. Raising the level as far up it will go is off and the next position down is the automatic setting. The third is 'on' slow and the fourth 'on' fast.

post-46936-1260232381_thumb.jpg

Link to comment
Share on other sites

I read there is a sensitivity setting for the automatic wipers but I cannot locate it. Does someone know where it is and if it could be why the auto position does not activate the wipers?

Thanks

On the wiper control arm you should see the word 'AUTO' printed on a collar that rotates and aligned with four incrments from '-' to '+'. I leave mine set on the third setting from the '-' which makes it slightly more sensitive but not at maximum sensitive. Also, I have to move the level to the second position for the auto wiper feature to engage. Raising the level as far up it will go is off and the next position down is the automatic setting. The third is 'on' slow and the fourth 'on' fast.

post-46936-1260232381_thumb.jpg

Thank you... I finally figured it out. Now I'm waiting for it to rain to see if it works!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership