Changed Knock Sensor, Now Car Wont Run!

[truplaya22688]

Any info would be helpful. 1996 ES300, 1MZ-FE motor. Today we got down to changing the bank 2 knock sensor. Changed knock sensor and put everything back on and now the car won't run at all. It starts briefly then just dies out by itself in less than a minute. Also the gas pedal seems to make the car die quicker. Actually the second I touch the pedal the rpms shoot down and the car dies. Checked for loose vacuum hoses and leaks and didn't find any. It seems as if the car is getting too much air, if that makes sense... Can anyone please advise? Also I followed these directions: http://www.findonefindall.com/toyota-sienn...nock_sensor.htm and some others from alldata.com.

[George_Jetson]

I am sure that you have allready checked the obvious, but I would recomend double checking the cam sensor. It is located on bank 2, near the flywheel, (which is real easy to see).