Jump to content

Recommended Posts

Posted

I have a '98 ES 300, check engine light came on, took it to a Toyota dealer down the street to read the code, bad oxygen sensor. They stated it was bank 1 sensor 2, can someone please tell me it's location and if it's difficult to get at?

Thank You in advance.

Posted
post cat.

Here is one about sensor.

Where is :

bank 1 sensor 1

bank 1 sensor 2

bank 2 sensor 1

bank 2 sensor 2

I never understood that.

Bank 1 Sensor 1: side of engine nearest windshield, between exhaust manifold and cat.

Bank 1 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the windshield.

Bank 2 Sensor 1: side of engine nearest to radiator, between exhaust manifold and cat.

Bank 2 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the radiator.

steviej

Posted
post cat.

Here is one about sensor.

Where is :

bank 1 sensor 1

bank 1 sensor 2

bank 2 sensor 1

bank 2 sensor 2

I never understood that.

Bank 1 Sensor 1: side of engine nearest windshield, between exhaust manifold and cat.

Bank 1 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the windshield.

Bank 2 Sensor 1: side of engine nearest to radiator, between exhaust manifold and cat.

Bank 2 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the radiator.

steviej

just as a side note that bank 1 sensor 1 is a pain to replace

  • 2 weeks later...
Posted
post cat.

Here is one about sensor.

Where is :

bank 1 sensor 1

bank 1 sensor 2

bank 2 sensor 1

bank 2 sensor 2

I never understood that.

Bank 1 Sensor 1: side of engine nearest windshield, between exhaust manifold and cat.

Bank 1 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the windshield.

Bank 2 Sensor 1: side of engine nearest to radiator, between exhaust manifold and cat.

Bank 2 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the radiator.

steviej

I took off the Bank 1 Sensor 2 O2 sensor.. but the cable runs into the car.. i heard something about the connection being in the car under the carpet, under the drivers seat.. please help, i cannot find the connection. thanks

Posted
post cat.

Here is one about sensor.

Where is :

bank 1 sensor 1

bank 1 sensor 2

bank 2 sensor 1

bank 2 sensor 2

I never understood that.

Bank 1 Sensor 1: side of engine nearest windshield, between exhaust manifold and cat.

Bank 1 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the windshield.

Bank 2 Sensor 1: side of engine nearest to radiator, between exhaust manifold and cat.

Bank 2 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the radiator.

steviej

I took off the Bank 1 Sensor 2 O2 sensor.. but the cable runs into the car.. i heard something about the connection being in the car under the carpet, under the drivers seat.. please help, i cannot find the connection. thanks

You will have to remove the seat , take care removing the electrical connections. once the seat is out of the car, look at the tranny hump and you should see a small slit in the carpet, right where the floor and hump meet,peel the carpet apart and you will see the connector for the sensor. you may need to cut the carpet a little more if needed. have fun : )

Posted

justin97,

How much of a pain is it to change bank 1 sensor 1? I changed bank 1 sensor 2 with a bosch, a couple days later the check engine light came back on. Both of these sensors are reading bad, hopefully the one caused the other to read bad again.

Thanks

  • 1 month later...
Posted
post cat.

Here is one about sensor.

Where is :

bank 1 sensor 1

bank 1 sensor 2

bank 2 sensor 1

bank 2 sensor 2

I never understood that.

Bank 1 Sensor 1: side of engine nearest windshield, between exhaust manifold and cat.

Bank 1 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the windshield.

Bank 2 Sensor 1: side of engine nearest to radiator, between exhaust manifold and cat.

Bank 2 Sensor 2: underneath car in pipe coming from the cat connected to the exhaust manifold/cylinders closest to the radiator.

steviej

I took off the Bank 1 Sensor 2 O2 sensor.. but the cable runs into the car.. i heard something about the connection being in the car under the carpet, under the drivers seat.. please help, i cannot find the connection. thanks

You will have to remove the seat , take care removing the electrical connections. once the seat is out of the car, look at the tranny hump and you should see a small slit in the carpet, right where the floor and hump meet,peel the carpet apart and you will see the connector for the sensor. you may need to cut the carpet a little more if needed. have fun : )

WHICH SEAT????? THE PASSENGER OR DRIVERS SEAT????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery