Jump to content

Recommended Posts

Posted

Wife has a 1999 rx 300. Recently the timing belt came off. It didn't break but somehow came off. We had it replaced and 10 miles later it was shredded mess. the mechanic is now saying that the problem with the belt is that it's not lining up and rubbing on the back shield causing it to shred. He also says the hydrualic tensioner is bad. Has anyone had any odd problems with their timing belts?

Posted
might have better luck in the rx forum

The suspect would be the idler tensioner or the water pump itself since it too is driven by the timing belt. Maybe the bearing failed and is allowing wobble on the drive roller, causing the belt to walk. At this point the Water pump, tensioner, and cam shaft pulleys are are suspect until you determine which one or ones are bad.

By the way did Lexus do this work?

Posted
might have better luck in the rx forum

The suspect would be the idler tensioner or the water pump itself since it too is driven by the timing belt. Maybe the bearing failed and is allowing wobble on the drive roller, causing the belt to walk. At this point the Water pump, tensioner, and cam shaft pulleys are are suspect until you determine which one or ones are bad.

By the way did Lexus do this work?

At lexus Now. we changed the water pump, don't know if they did the pulleys' and tensioner. Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery