Help / Problem W/ Brembo Rotors

[Oconee1985]

I ordered a set of brembo rotors from Nopi and the fronts went on fine w/ no problem but Ive ran into a problem w/ the rears... When I look at my old rotors it looks like the axle nut comes thru the rotor and bolts on over the rotor... The problem is the rotors that Nopi have a huge axle hole and there is no lip for the axle nut to bolt onto... I called nopi and they said send them back and I have to pay the shipping unless I can show them they are listing the wrong rotors on their site... I plan on calling Brembo but figured it wouldnt hurt to ask if anyone else has ran into this problem... Oh and I guess it would help if I mentioned my car is a 94 sc400

Here is the url for the nopi shocks

http://www.nopionline.com/nopistore/dsp_pa...%20SC400%201994

[JDOwen2]

The rotors fit snug over the hub. Spray with PB Blaster of WD40 and let it sit for awhile. You'll probably have to persuade the rotor off the hub with a big hammer. Read the following: Rear rotor

[SKperformance]

their are bolt holes on the rotors hat which you screw a bolt from the brake caliper into it and it will bang the hat off the hub very loudly in one crack