liteeyez2001 Posted September 14, 2004 Share Posted September 14, 2004 help me change my fog light bulb...i wanna put my hyper white bulbs to match my headlights... :chairshot: Quote Link to comment Share on other sites More sharing options...
geoffreymg Posted September 14, 2004 Share Posted September 14, 2004 I just changed mine on a 97. There are 3 screws on the foglight housing that hold it in. You can feel them by reaching in the inlet beside each of the lights. There is 1 screw on each side of the housing and 1 on top. I think it was a 6mm deep socket that i used. The passenger side is relatively easy but the screws are hiddden so you will be doing it blind. The driver side is a little trickier b/c of the plumbing that blocks the inlet. Taking off a few of the splash guard screws under the bumper helps. It's a pretty easy job and it makes HUGE difference in the lights. I just put Sylvania SilverStars all around. looks great. gl Quote Link to comment Share on other sites More sharing options...
liteeyez2001 Posted September 14, 2004 Author Share Posted September 14, 2004 thanx Geoff...i think i know exactly what ur talking about...i'll go and check it out now... Quote Link to comment Share on other sites More sharing options...
JDOwen2 Posted September 14, 2004 Share Posted September 14, 2004 I changed out my fog lights with the Silverstars also. There is an adjustment to raise the beam. I turned mine up about three turns and raised the beam pattern. Quote Link to comment Share on other sites More sharing options...
grnsc40095 Posted September 14, 2004 Share Posted September 14, 2004 liteeyez2001, The way I had to change my foglight bulbs for my Sc400 '95 1. Take off the front tire's for easier access to foglight 2. Take the splashguard down under the foglight 3. The foglight will be enclosed, with a circular plastic cap. I believe you turn it counter clock-wise to open the casing. This will give you access to the bulb and socket. 4. To separate the foglight wire wiggle and tug at the same time, until it jars loose. *NOTE* disconnect the wire from the socket before you open the clasp. This keeps the bulb in place and out of your way. 5. To open the clasp, I believe you push down and it will unfasten. Hope this helps? Quote Link to comment Share on other sites More sharing options...
j_lee84sc Posted September 15, 2004 Share Posted September 15, 2004 also if you want to make getting to them super easy just take out your headlamps it keeps you from having to crawl under the car and remove the mudguard and guess where the bolts are...to get the haedlamps out(stupid easy go to this web site) http://www.reepa.com/headlight.htm courtesy soarer479.... this is the easiest way i think. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.