davidemills Posted June 26, 2004 Share Posted June 26, 2004 Hello all I have purchased a hirschmann replacement power antenna. I took the origanal out fine. The original has a relay that the harness plugs into and from the relay it plugged into the motor. The replacement has a red and white wire. the original harness has a blue and a black/yellow wire going to the motor. My question is this do I leave the realy hooked up and use the blue and black/yellow wires to hook up the new red and white wires? If so which one goes to which? I have tried the antenna using this and the antenna does nothing I have switched the wires on the red and white and still nothing. Do I need to take the relay out if so which wires do I use? thanks Quote Link to comment Share on other sites More sharing options...
SKperformance Posted June 26, 2004 Share Posted June 26, 2004 year? Quote Link to comment Share on other sites More sharing options...
davidemills Posted June 26, 2004 Author Share Posted June 26, 2004 Sorry its a 1993 Quote Link to comment Share on other sites More sharing options...
Lex3486 Posted June 27, 2004 Share Posted June 27, 2004 I woulda tried replacing the mast first before I went off buying a new motor and all...usually it's just the mast that breaks, and they only cost like $15 from Pep Boys. :whistles: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.