hpapad01

Does anyone know what is the model number of the ML amplifier in '01 GS300? Thank you

Can you suggest an easy way to test the amp? If it is the speaker do you know if I can get another from a different source? Thanks again for your time.

Hook up a test speaker and see if garble is still there, if it is amp is bad. If not speaker was bad. <_< ← Thanks Turbo, I thought about it, but then I figure that if the amp was bad all the speakers should sound the same. I am convinced that it is the rear speaker only. I guess I was trying to figure out why. If it sounds garbled does it mean that the speaker is blown? I do play music loud, but never loud enough, that it would cause the speaker to blow. The car is out of warranty (50K) and I do think the ML components should last longer. Anybody else had an issue with the rear speaker? Herk

Hi everyone, Is there a way to tell if my rear speaker (’01 GS300 w/ML) is in good condition? It sounds like garble but not all the time. At low volume you cannot tell, but as the volume increases then you can clearly hear it. It started a couple of days ago. Thank you.

Hi everyone, Is there a way to tell if my rear speaker (’01 GS300 w/ML) is in good condition? It sounds like garble but not all the time. At low volume you cannot tell, but as the volume increases then you can clearly hear it. It started a couple of days ago. Thank you.

Thanks guys. That is what i told her to do. I will post results once available.

Hi everybody, A friend's '01 GS300 has the Airbag warning light on. I did a quich search for any reset procedures, but did not see anything for '01 GS. She said the light came on when she started the car Monday morning and it stayed on since. Any info would be very appreciative. Herk

Are you sure is cloudy on the inside or there is moister inside the headlight? I bought a can of PLEXUS (no relation to Lexus) to clean my wife's BMW plastic rear window, and then I used it to clean my headlights. What a difference. I just spray on the lens, let it stay on for about 10 minutes, and then buffed it. Amazing results. Herk

I'm afraid they did send me the engine filter, but when I called them he swore up and down that I had the correct part # to match the cabin air filter. They said I could send it back for a full refund, no problem. But that still leaves me without a cabin air filter. I called my local Toyota dealer, and they don't even carry a cabin air filter for a 2001 Lexus GS300. I don't know who posted the previous message, but I'm not sure a Toyota cabin air filter is the same as a Lexus cabin air filter, seeing as they didn't even carry a Lexus cabin filter. They told me to call the Lexus dealer ← I just received my filter from ToyotaandLexusParts.com. The bar code on the box says 'Element, Air Refiner', with the following part # 87139-50030 and it came in the red Toyota box. The charge was $25.50. Herk ← I just cheked the site and they are listing the price as $35.07 ← That is correct. But when you place the order it shows only $25.50. I just replaced the filter in my car and it is extactly the same as the old filter. BTW-The old filter was very dirty. I drove out for lunch and the air was on high for maybe a minute and then it went into low. Before I would drive to my destination and the air would be on high for about 5 minutes. I guess the clean filter does the job. Herk

I'm afraid they did send me the engine filter, but when I called them he swore up and down that I had the correct part # to match the cabin air filter. They said I could send it back for a full refund, no problem. But that still leaves me without a cabin air filter. I called my local Toyota dealer, and they don't even carry a cabin air filter for a 2001 Lexus GS300. I don't know who posted the previous message, but I'm not sure a Toyota cabin air filter is the same as a Lexus cabin air filter, seeing as they didn't even carry a Lexus cabin filter. They told me to call the Lexus dealer ← I just received my filter from ToyotaandLexusParts.com. The bar code on the box says 'Element, Air Refiner', with the following part # 87139-50030 and it came in the red Toyota box. The charge was $25.50. Herk

Thanks Neo. I see what you are talking about.

If the leather is shiney and hard, then you need to apply a conditioner. I use Lexol leather products once every quorter. It keeps the leather moist and soft to the touch. I clean first and then apply the conditioner with my hands. Herk

Hello, I was looking a set of L-Tuned 18" Salina Wheels on EBay for my '01 GS300. The following is part of the description "The wheel in this auction is recommended to be mounted on the rear of your Lexus GS and is not intended to be installed on the front." Could someone please explain to me why you can mont them on the rear but not on the front? Does size has anything to do with it? The size is 18 x 9.5, with a 45mm offset. BTW - the item number is 7965586133 Thanks, Herk

Kojo, Welcome to the forum. Try this ebay link: http://cgi.ebay.com/ebaymotors/ws/eBayISAP...sspagename=WDVW Herk

I just spoke with the Brembo US office. (the 800 number is under "contacts" on their website) They mentioned that www.buybrakes.com is an authentic retailer for their product. They also mentioned the Tire Rack and some place in Florida. ← Thanks for the info. I just happend to look on the bottom of this page and saw the www.buybrakes.com advertising. It looks like they have several options regarding Brembo products. I will most likely purchase from them. Herk

I decided to purchase Brembo rotors for my '01 GS3. I have done a lot of searching in EBay with different prices from different vendors. Every single vendor advertises that his or her products are genuine Brembo. Is there a way to verify? Has someone done any business with a reputable vendor that can recommend to me? Herk

Thanks. I must have mished Kino's post. BTW - Are happy with your selection? Would you purchase again? Herk

I am looking two different offerings in ebay for F/R rotors for '01 GS300. One from OC Autosports for $159.00 and the other from Race Concepts for $135.00. Both offer the same product (Cross-Drilled Slotted with Silver Zinc Plating. Does anyone have any experience with either product? Herk

Could you post a picture of the car. It will be better if you take a picture of the engine and post it here. From whom did you buy the car from (Dealer / Individual)? Didi you run a CarFax prior to purchase? Herk

How do you tell the difference between II, III and IV. Is it only by the year or is there something else? You are probably right, my '01 should be a gen II. I do have a friend that just updated his with same looking dvd like mine (v.03.1) and it is working for him. Same year car build same month same options. He is out of town and I cannot check my dvd on his unit. Anyway, the person I got the DVD is sending me another one. Hopefully this one will work. Herk

Colin, The numbers on the existing DVD disk are: 86271-47020 464210-5000 Data 2000 v.1 Herk

Hi everyone, I just received a DVD version 03.1 for my '01 GS300 which has the gene III DVD unit. I cannot get my DVD player to read the DVD disk. I am getting a "read error". I can read the dvd disk in my computer and I can access the directories. The following part number is on the DVD=86271-33040, under that is the following number 464210-0337 with Data v.03.1 Is it possible that the dvd is for the gene IV dvd units? or the dvd is bad and my unit cannot read it. Thank you for your help. Herk

You need to know that the yellow lamps are part of the HID option. Another words, if your car has the yellow lamps then it came with HID. If you do not like it I'll be happy to exchange for you. I just think that you need to be aware of the fact that those yellow lamps are not easy to come by.

If you have not bought the GS400 send me an email herk@lantech.net. I have a '98 GS400 with 95K for sale. Herk

Hey TURBOGS30, May I ask you why you would buy from a used car lot? I am affiliated with a used car lot and I like to know what people think and how we can improve. Maybe you had a bad experience or maybe someone you know had a bad experience. Your input will be greatly appreciated.