Jump to content


Recommended Posts

Posted

This may seem like a silly question but our RX driver's side sun visor does not stay up. You push it up into the recess of the ceiling

headliner and it falls down to about a 45 degree angle. Constantly gets in the way of your vision and you almost always hit your head on

it when getting into the vehicle. I have looks and looked at a way to tighten this up all to no avail. Does anyone know of a way to

make this tighter or will I just have to buy a new one?

Anyones help and advice is appreciated


Posted

This may seem like a silly question but our RX driver's side sun visor does not stay up. You push it up into the recess of the ceiling

headliner and it falls down to about a 45 degree angle. Constantly gets in the way of your vision and you almost always hit your head on

it when getting into the vehicle. I have looks and looked at a way to tighten this up all to no avail. Does anyone know of a way to

make this tighter or will I just have to buy a new one?

Anyones help and advice is appreciated

Hi Michael, Sun-visor issue is a common concern amongst Lexus owners. I too have the same problem. Only remedy is to replace with a "new" (strongly against it. Too expensive), or a used one that still stays up.

Roland

  • 1 month later...
Posted

Had the same problem on my rx300, short of replacing you can use a plyer to crimp a section of the visor where the rod goes into it about 2 or 3 inches from the point of insertion. You may have to do this a couple of times.

  • 2 years later...
Posted

Velcro same color

Glue with Elmers and tape with painter tape until dry.

Cheap

Easy

Works

Mine is still fine after a year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery