Need Help Replacing Led's On Control Board

[GSESRXOWNER]

HELP!!!

Hope someone who has done this little job can give me some advise. I've got my radio apart, the control board with the led light and sound control, and the led's are soldered in. I was hoping it was like the a/c blubs, twist and replace. Butttttt nooooo. Is the only way to replace the led's are to solder them or should I just replace that whole board, 3 led's out..

Any assistance would be great! Thanks

[sakataj]

HELP!!!

Hope someone who has done this little job can give me some advise. I've got my radio apart, the control board with the led light and sound control, and the led's are soldered in. I was hoping it was like the a/c blubs, twist and replace. Butttttt nooooo. Is the only way to replace the led's are to solder them or should I just replace that whole board, 3 led's out..

Any assistance would be great! Thanks

what is the year of your car? it sounds like u just need to either DIY and unsolder them and resolder some in or replace the board! but i have a DIY on this just waiting to see what year yours is

[dcfish]

HELP!!!

Hope someone who has done this little job can give me some advise. I've got my radio apart, the control board with the led light and sound control, and the led's are soldered in. I was hoping it was like the a/c blubs, twist and replace. Butttttt nooooo. Is the only way to replace the led's are to solder them or should I just replace that whole board, 3 led's out..

Any assistance would be great! Thanks

The PCB board should be replaced.

[GSESRXOWNER]

HELP!!!

Hope someone who has done this little job can give me some advise. I've got my radio apart, the control board with the led light and sound control, and the led's are soldered in. I was hoping it was like the a/c blubs, twist and replace. Butttttt nooooo. Is the only way to replace the led's are to solder them or should I just replace that whole board, 3 led's out..

Any assistance would be great! Thanks

what is the year of your car? it sounds like u just need to either DIY and unsolder them and resolder some in or replace the board! but i have a DIY on this just waiting to see what year yours is

It's a 98. I went to dealership and no luck there on blubs or board. had to go to a pc. shop and still waiting on bid.