MKMD Posted December 28, 2008 Share Posted December 28, 2008 ****************1996 LS 400************* Hi: Changed the dist caps Rotor Wires and plugs All above OEM The car starts ok BUT check Engine light on and Trac OFf light blinks. Car also idling faster around 2 Any advice would be greatly appreciated M Khan Quote Link to comment Share on other sites More sharing options...
93ls400walt Posted December 28, 2008 Share Posted December 28, 2008 make sure all of the sensor connections are plugged in and secure. Like the connector for the MAF. And vac hoses are connected. Quote Link to comment Share on other sites More sharing options...
TexasLexus94 Posted December 28, 2008 Share Posted December 28, 2008 There's a lot of posts here about the check engine light coming on after disconnecting the battery-It's a glitch, not a problem. Go to Lexls.com, I believe-he has a great tutorial to fix it. Mine is on-too lazy to fix it until the weather warms up. Not sure about the trac light...Best of luck. Quote Link to comment Share on other sites More sharing options...
John2 Posted January 1, 2009 Share Posted January 1, 2009 the trac light is coming on in response to CEL. you need to get the code pulled for the CEL. http://www.lexls.com/tutorials/ i had same issue after a whole tune up and timing belt change. it was an O2 sensor. theory is the new plugs/wires/rotor, etc. got that part of car up to spec and the old/lazy orig O2 sensor did not react as needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.