nate digital Posted January 6, 2008 Posted January 6, 2008 hi im working on a rear suspension of a sc300. why are the lower control arm bolts so hard to remove. there stuck. even a very strong impact gun wont remove them. is there some trick or special tool i dont have??? help!!
JIBBBY Posted January 8, 2008 Posted January 8, 2008 Try using liquid wrench or WD40...Spray the bolts generously and let is sit for a minute and torque it down... Those suspension bolts haven't been turned since the car was built, exposed to the outside elements they tend to freeze up and get stuck... Use a breaker bar with and extension and torque, it will give...
SKperformance Posted January 8, 2008 Posted January 8, 2008 The other problem is the bolts go through an eyelet inside the rubber bushing . So even if the bolt turns it is stuck to the eyelet and will have to be cut off to be removed.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now