rockhead Posted July 26, 2007 Share Posted July 26, 2007 I own a 2001 RX 300 Silversport and have a problem with my key. On the back side of the remote, the screw holding the remote together fell out and with it, the "guts"/the entire electronic mechanism of the key. I didn't notice the guts were missing until it was too late, and they are now lost. I still have one working master key, but need to replace the electronics on the damaged key. The blade on the damaged key is cut and in perfect shape, but I now have no electronics to it - just the shell and the cut key. What are my least expensive but most reliable solutions for this problem? I've seen the replacement keys on eBAY but am a little leery about the ease and actual success of the programming. Any advice is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted July 26, 2007 Share Posted July 26, 2007 Get a used key from ebay and you can use the tutorial on this site to program the keys. Quote Link to comment Share on other sites More sharing options...
LexKid630 Posted July 27, 2007 Share Posted July 27, 2007 Get a used key from ebay and you can use the tutorial on this site to program the keys. I was just going to suggest the same thing! Make sure the key you get on ebay is for the correct car though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.