tonydgs400 Posted January 4, 2006 Posted January 4, 2006 can anyone help me program the key with the built in remote to my 98 gs400? i contacted lexus(usa)but they said that i have to send the car back over(usa) & i'm in the bahamas & thats to expensive for me, & we don't have a lexus dealer in the bahamas
LexInfo Posted January 4, 2006 Posted January 4, 2006 can anyone help me program the key with the built in remote to my 98 gs400? i contacted lexus(usa)but they said that i have to send the car back over(usa) & i'm in the bahamas & thats to expensive for me, & we don't have a lexus dealer in the bahamas wireless. 1- all doors closed and locked except drivers door (open and unlocked) 2- place key in ignition turn it to on and off 3- cycle the manual door lock from unlock to lock 5 times 4- closed the driver side door and open the driver side door 5- perform step 3. 6- place key in ignition and turn it on to off (one time to add a key) on and off two times ( rewrite ) pull key out of ignition, the door lock should response by going to lock and unlock( one time to add key) lock and unlock two times for rewrite mode. 7- push lock and unlock bottom on key together for 1 sesond and push unlock one time. if procedure is performed correctly the door lock will lock then unlockand alarm beper will sound. immobilizer. 1- start car and stop car. remove key from ignition cylinder. 2- place registered master key in ignition do not turn on. 3- push gas pedal 5 times 4- push brake pedal 6 times 5- take out registered master key from ignition. 6- place new key in ignition. do not turn on 7- push gas pedal one time. 8- wait 60 seconds, the factory security indicator should go off then the key is programmed. the immobilizer section will only work if you have a registered "Master key" if you only have a valet then it will not work unless the valet was registered to be a master key. its sounds kinda crazy to send a car back to the states just to get the keys programmed.
dcfish Posted January 4, 2006 Posted January 4, 2006 can anyone help me program the key with the built in remote to my 98 gs400? i contacted lexus(usa)but they said that i have to send the car back over(usa) & i'm in the bahamas & thats to expensive for me, & we don't have a lexus dealer in the bahamas wireless. 1- all doors closed and locked except drivers door (open and unlocked) 2- place key in ignition turn it to on and off 3- cycle the manual door lock from unlock to lock 5 times 4- closed the driver side door and open the driver side door 5- perform step 3. 6- place key in ignition and turn it on to off (one time to add a key) on and off two times ( rewrite ) pull key out of ignition, the door lock should response by going to lock and unlock( one time to add key) lock and unlock two times for rewrite mode. 7- push lock and unlock bottom on key together for 1 sesond and push unlock one time. if procedure is performed correctly the door lock will lock then unlockand alarm beper will sound. immobilizer. 1- start car and stop car. remove key from ignition cylinder. 2- place registered master key in ignition do not turn on. 3- push gas pedal 5 times 4- push brake pedal 6 times 5- take out registered master key from ignition. 6- place new key in ignition. do not turn on 7- push gas pedal one time. 8- wait 60 seconds, the factory security indicator should go off then the key is programmed. the immobilizer section will only work if you have a registered "Master key" if you only have a valet then it will not work unless the valet was registered to be a master key. its sounds kinda crazy to send a car back to the states just to get the keys programmed. Here you go. key_program_gs.pdf
tonydgs400 Posted January 4, 2006 Author Posted January 4, 2006 thanks alot buddy, will try when i get off
dcfish Posted January 4, 2006 Posted January 4, 2006 thanks alot buddy, will try when i get off Let us know how it pans out for you. ;)
redlinekev Posted November 12, 2008 Posted November 12, 2008 Thanks for the info on the programming. Got my new key/remote both programmed! appreciate.
DaSwede_420 Posted January 3, 2009 Posted January 3, 2009 I've got a similar problem on my 1995 GS300, I unhooked the drivers side door "indicator" so i could have the door open and it wouldnt beep while listening to music. Key got in washamashine(thanks to wife) and the dealership said it would be 477.00 to replace a door latch? i have the new key from the dealership, they said they just can't program it cause of the latch being disabled????, can i just take the latch sensor off another door and then program it?, becausethe remote locks & unlocks fine without the latch "sensor" on the driver side door ,you just need that to "program a new key". Any ideas very appreciated!!! :P PEACE!!!
OT0814 Posted November 4, 2010 Posted November 4, 2010 ive been trying this on my 2002 gs300 is the procedure the same? it doesnt seem to work for me. i bought a key that was already used does that matter?
denis_demenis Posted November 14, 2010 Posted November 14, 2010 take a look here it can halp you HTTP://DEMENIS.AMAZINGWEBMALL.COM
justGS300 Posted June 5, 2011 Posted June 5, 2011 My second key is acting weird. Its him I cannot program for keyless. Everytime the car sits at home within the range of the second key, it opens all windows. So I thought to reprogram it, but it didnt work. The red light also flashes for no reason. I fixed it by taking the battery out of the second key. I have tried every option there is in the interenet about programming. We'll see how it goes.
Zelateur Posted May 31, 2022 Posted May 31, 2022 Hello I bought my new car at auction (03 Lexus GS 430) and I only have ONE key(don't know if it is a master key or not) when I enter the key in the ignition, the security light doesn't go off and when I turn on start,the car crank but won't start. Also the remote doesn't work. Can anyone please help me start my car ??
Zelateur Posted May 31, 2022 Posted May 31, 2022 On 11/14/2010 at 10:33 AM, denis_demenis said: take a look here it can halp you HTTP://DEMENIS.AMAZINGWEBMALL.COM Hello I bought my car at auction (03 Lexus GS 430)and I only have ONE key ( don't know if it is a master key or not) when I enter the key in the ignition, the security light doesn't go off and when I turn on start,the car crank but won't start. The remote doesn't work.Can you please help me start my car??
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now