kgh31386 Posted September 25, 2005 Posted September 25, 2005 I just got a K and N air filter put in, and the guys putting it in said that the oil from the filter can make my Mass oxygen sensor go bad? Is that true, is there anything I can do to avoid that. And how much are they to get fixed?
TurboGS300 Posted September 26, 2005 Posted September 26, 2005 I just got a K and N air filter put in, and the guys putting it in said that the oil from the filter can make my Mass oxygen sensor go bad? Is that true, is there anything I can do to avoid that. And how much are they to get fixed? ← WRONG! It's not the 02 sensor that can go bad, If anything it's the VAF !!! <_<
TurboGS300 Posted September 26, 2005 Posted September 26, 2005 And what exactly does that mean? ← MAF MAS VAF
bartkat Posted September 26, 2005 Posted September 26, 2005 Mass Air Flow sensor. Some people are concerned that over oiling the filter will cause the sensor to get coated with oil and give incorrect air flow readings to the engine control unit. It's not a problem if the filter oiling is done correctly.
kgh31386 Posted September 26, 2005 Author Posted September 26, 2005 And if the sensor does give bad info to the engine, then what's that do? I'm retarded when it comes to sensors.
bartkat Posted September 26, 2005 Posted September 26, 2005 And if the sensor does give bad info to the engine, then what's that do? I'm retarded when it comes to sensors. ← It will give a check engine light. In the worst case the car will not run properly. Then you'd have to clean the sensor, if it isn't ruined, but I have never had the problem and have run K&N and TRD filters on several cars.
kgh31386 Posted September 26, 2005 Author Posted September 26, 2005 Thanks. I hope mine works just as well.
SKperformance Posted September 26, 2005 Posted September 26, 2005 To make sure it is not over oiled 1 after oiling it swing it around to gravity pull the oil across the surface and drip the excess off. 2 let it sit on an angle to allow the pleats to drain down for an hour. It should be fine then Never oil and insert right away
GuyTelefunken Posted September 26, 2005 Posted September 26, 2005 Better method....use stock filter, save a headache and $$$.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now