Jump to content


Aftermarket Amp Install


Recommended Posts


if you type in ALL CAPS people will think you are yelling at them.

Try going through the firewall with/at the steering wheel column.

It takes some poking and prodding but that is where most people post that they have put wires through.

Why not connect into the fuse box under the dash and use a hot wire from there?

steviej

Link to comment
Share on other sites

depending on the power needed for the amp running a wire in the fuse box shouldn't really be done for overload ont he 10 gauge wire in it

there is a hole do a search and you should find a picture of it location

it is above the brake pedal

and below the brake booster to the side

Link to comment
Share on other sites

yes i wouldnt recommend putting any amp wire threw the fuse box.ive burnt up plenty of wires in my system days and i would never put it from the fuse box.not only could you overload but you can start a fire in the car.seen it happen already so thats why im saying it.sk is correct as allways.its right near the brake and all you have to do is poke out the rubber peice.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership