Oconee1985 Posted May 17, 2005 Share Posted May 17, 2005 I ordered a set of brembo rotors from Nopi and the fronts went on fine w/ no problem but Ive ran into a problem w/ the rears... When I look at my old rotors it looks like the axle nut comes thru the rotor and bolts on over the rotor... The problem is the rotors that Nopi have a huge axle hole and there is no lip for the axle nut to bolt onto... I called nopi and they said send them back and I have to pay the shipping unless I can show them they are listing the wrong rotors on their site... I plan on calling Brembo but figured it wouldnt hurt to ask if anyone else has ran into this problem... Oh and I guess it would help if I mentioned my car is a 94 sc400 Here is the url for the nopi shocks http://www.nopionline.com/nopistore/dsp_pa...%20SC400%201994 Quote Link to comment Share on other sites More sharing options...
JDOwen2 Posted May 18, 2005 Share Posted May 18, 2005 The rotors fit snug over the hub. Spray with PB Blaster of WD40 and let it sit for awhile. You'll probably have to persuade the rotor off the hub with a big hammer. Read the following: Rear rotor Quote Link to comment Share on other sites More sharing options...
SKperformance Posted May 18, 2005 Share Posted May 18, 2005 their are bolt holes on the rotors hat which you screw a bolt from the brake caliper into it and it will bang the hat off the hub very loudly in one crack Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.