Jump to content


Moon Roof


Recommended Posts

On my '01 ES300 the back corner of the moon roof on the passenger side is about 1/8" lower than the driver side's back corner. When you look at it on the inside from the drivers seat you can see a very small amount of light "peeking" through. When it rains I can see a small amount of water dripping down -- there's no water in the car, so I guess it's going out one of the drains.

Is there some way to adjust this corner so the glass will seal tighter?

Thanks in advance !!

:rolleyes:

Link to comment
Share on other sites


you need to remove the screw and place a trim in it to get it back up.

I hope you have warr left.

As the back ones are hard to get a shim in their, which only costa about a few cents.

It is all about the labour.

Link to comment
Share on other sites

you need to remove the screw and place a trim in it to get it back up.

I hope you have warr left.

As the back ones are hard to get a shim in their, which only costa about a few cents.

It is all about the labour.

Thanks for the info !!

Are there any pics or diagrams showing what screws, etc. are involved?

:)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership