Easiest Way To Replace "parking" Light Bulbs

[geoffreymg]

1997 sc400-- i've replaced all bulbs except for the parking lights. My OEM repair manual is on the way but i just got the new bulbs today. Which means i cannot wait a few days to put them in ! ! ! any suggestions?

[geoffreymg]

I winged it and i was able get the bulbs out with little trouble. I was thrown off at 1st b/c they r kind of hidden. PIAA white LED's went right in and look incredible. Highly recommended to all. B)

[sc_toy]

easiest way is to take out the whole light, I can't fit my hands in behind the light to get them out, but if you could that'd be quicker. To remove the whole light, there's the one bolt on the rad support, the other two are behind the wheel well (you have to remove a few bolts from the inner fender/wheel well and bend it out of the way to get them out).

Good luck!

Aaron

[grnsc40095]

geoffreymg, I changed my park lights sometime ago. If I remember correctly, you turn the light socket counter clockwise to loosen, then slide the unit out. On the drivers side I had to remove the battery to get access. Hope this helps?

[geoffreymg]

I couldn't figure out how to get the headlight out. I didn't know you have to go through the wheel well. Luckily i have a 6' 5'' friend with lanky fingers. (please don't take this out of context)