yakev724

Fast instructions (10-15 minutes to swap locking mechanism or 20-25 minutes to install $15 alternative) You need: two flat screwdrivers, short philips, torx30, 10mm. (drill and soldering iron to install alternative) 1. Remove door panel http://www.clublexus.com/forums/showthread.php?t=288373 2. Make sure that glass is up. 3. Remove 4 torx30 screws (three on the side and one inside) that hold locking mechanism 4. Unlatch small plastic clip (red circles on picture #1 from the post #73) 5. Remove one 10mm bolt (under “inside” torx bolt) that holds vertical glass rail (yellow circle picture #1 from the post #73) 6. Look up, toward external door handle through large opening in the door from inside. You should see to rods attached with plastic clips to the door handle. Undo it. (picture #6 from the post #73) Locking mechanism is ready to come out. You should be ready to understand what is on the pictures in the post #4 now.

If it wouldn't be too much work, could you send me a copy of that manual page? I need to replace the display on my 1998 toyota harrier (rx 300) with a tv, but need the schematics. russianizer76@gmail.com thanks, yevgeny

hi please send any console screen (non-nav) diagrams you may have for '99 rx to russianizer76@gmail.com thanks