supo Posted May 13, 2004 Posted May 13, 2004 Igot a RX300 and would like to put 18 wheels, but I heard that hte 255-55-18 tires won`t fit. Any ideas? Help! Thanks
weinkaufjr Posted May 13, 2004 Posted May 13, 2004 I have 18s with M&S Toyos, 8” wide on my RX300. Needed 3/4 “ spacers all around. On full lock to the left I sometimes will get tire rub. They run stiffer and nosier than stock but have performed excellent for my needs in two years of skiing with the vehicle.
SKperformance Posted May 14, 2004 Posted May 14, 2004 the rims and tires will work fine on an RX the offset is what is dependant on the wheel rubbing.The right offset will not need spacers.
BDA_Lexus Posted November 20, 2005 Posted November 20, 2005 the rims and tires will work fine on an RX the offset is what is dependant on the wheel rubbing.The right offset will not need spacers. ← I read your reply on the 255/55/18's I am planning to put these on with 330 stock 18's and just want to know if I will need spacers. THanks BDA_Lexus
BDA_Lexus Posted November 20, 2005 Posted November 20, 2005 Igot a RX300 and would like to put 18 wheels, but I heard that hte 255-55-18 tires won`t fit. Any ideas? Help! Thanks ← Did you get any replies on this? Thanks Nate
strmrdr23 Posted November 21, 2005 Posted November 21, 2005 Igot a RX300 and would like to put 18 wheels, but I heard that hte 255-55-18 tires won`t fit. Any ideas? Help! Thanks ← hey, so check out my posts on wheel spacers. i put 255/55/18 on my stock rx400h rims that i mounted on my rx300...the tires rub in back. i put 5mm but i think 10mm spacers would be better. i think i'd prefer 245/50/18 tires better as i think they would be closer to factory rolling diametre...what everybody said about having the correct offset is correct and super important in ensuring your wheel/tire combo will fit or not.
BDA_Lexus Posted November 21, 2005 Posted November 21, 2005 the rims and tires will work fine on an RX the offset is what is dependant on the wheel rubbing.The right offset will not need spacers. ← SK, I am have the stock RX330 rims and plan to put them on my RX300 and just want to be sure that they will work fine with out rubbing on the rear strut. ANy info that you can provide will be helpful. Thanks nate
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now