Few Quick Questions On Changing Rear Brake Pads...

[topgun129]

Hi,



I have a 99 ES300 and will be changing the rear brake pads and had a few quick questions:



1. Do you have to engage the parking brake when doing this job? (I don't
think we need to or the caliper won't come off, correct?)



2. What is the torque amount for the caliper bolt once you go to tighten it?



3. What is the torque amount for the tire lug nut once you go to tighten it?



4. Is there any DIY tutorial for rear brake pads you know of?



Thanks!

[gbhrps]

topgun129,

If you're just changing the pads it won't matter either way. Only if you are changing the rotors must it be off.

As far as torque numbers are concerned, it really isn't a big deal. Tighten the caliper bolts until they contact with the slide pin and 1/8 of a turn more, or until really snug. As for the wheel lug nuts, 100 ft lbs is adequate.

As far as doing the job, do a youtube search for vids on Camry or Lexus brake replacement. There are many to choose from that will point you in the right way. Use a large C clamp or water pump pliers to reseat the caliper piston. You won't need any fancy tools otherwise. Good Luck!