superman8589 Posted March 19, 2013 Share Posted March 19, 2013 Hey, my name is robbie new to the form I have posted another post concerning my car not turning on after starter build. I came across this plug it seems as if it was screwed in but I have no idea where it goes what it is.. previous owner mechanic must of unhooked it... Found it in driver side under v bank. Quote Link to comment Share on other sites More sharing options...
steve2006 Posted March 23, 2013 Share Posted March 23, 2013 It look like a supressor capacitor, earth tag on one end and a single wire plug to the connector. Quote Link to comment Share on other sites More sharing options...
fsuguy Posted March 25, 2013 Share Posted March 25, 2013 Hi, If it is a white plug, and if it is suspiciously close to the driver side ignition coil (and it looks like it is!), I would hazard a guess that it bolts onto a bracket very near the coil. I did a writeup somewhere here on replacing the driver side ignition coil - if you can find it, it will explain where the plug goes and how to put it there. Hope this helps. Quote Link to comment Share on other sites More sharing options...
superman8589 Posted April 12, 2013 Author Share Posted April 12, 2013 fsuguy.. I can't find it any where.. do u have a link.. and would that cause car not to turn over.?? Quote Link to comment Share on other sites More sharing options...
fsuguy Posted April 16, 2013 Share Posted April 16, 2013 Here it is: http://us.lexusownersclub.com/forums/topic/60609-how-to-change-ignition-coils-on-92-ls400/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.