sandygarf Posted February 6, 2013 Posted February 6, 2013 I just ordered a new passenger side rear view mirror for my 200o es 300. The mirror was hit and broken off. Has anyone changed this mirror? So I have to take the entire door panel off or just the triangular piece above the panel where the mirror bolts in? How is that piece held in? Any help appreciated. Thanks.
gbhrps Posted February 6, 2013 Posted February 6, 2013 sandygarf, You'll need to pull the entire interior door panel to change out a door mirror. The main reason being the wiring harness for the mirror will be under the main door panel. There will be three 10 mm nuts with washers attached that hold the mirror itself to the door, and then that wiring harness connector. It'll take longer to remove the inner door panel, then to change out the mirror. Good Luck!
azcat90 Posted February 8, 2013 Posted February 8, 2013 Door panel actually comes off pretty easily - less steps than my 93 Camry. Careful you dont snap the tweeter off.
Lexlogic Posted February 9, 2013 Posted February 9, 2013 When removing interior door panel to change out a door mirror. The power window switch assy is pry up from the front end and not from the rear end, using a flat tip screw driver.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now