trwiatt Posted February 26, 2004 Posted February 26, 2004 Have given up, can't find our lost master key. so now only have the valet key. Hoping someone can help with some info on these things. Lots of people sell replacement master keys on EBay, but all say you have to check the FCC ID# on your existing key and get one of the same type. So, what's the FCC ID# on your master key, fellow 2000 ES owners? The second part of the puzzle is the "long or short blade". Apparently these keys came in two different lengths, any idea whether the 2000 ES was long or short? Or maybe someone could just measure theirs and tell me how long it is. I found a guy who will take it from there - on this model if you don't have a master key you can take out the security ECU and send it and your keys to this guy, and he'll reprogram all to match. My idea is to buy an uncut master key (of the correct kind!) and send to him along with my ECU and valet key and then get back a matched set. Quite a PITA, eh? I searched the archives and didn't find any advice on this, but surely I'm not the only person unlucky enough to have lost my master key. So, if you know the FCC ID# and blade length, pls help me out!
SW03ES Posted February 26, 2004 Posted February 26, 2004 You can also order a new master key from www.lexus-parts.com they come pre-cut according to the VIN. Check it out.
byohzrd Posted February 26, 2004 Posted February 26, 2004 My FCC ID is HYQ1512V The 2000 ES key is the long one, approximately 1 13/16 inches. Hope this helps.
Venture Posted February 27, 2004 Posted February 27, 2004 What do lexus-parts mean by this: "Non-remote non-transponder key. Perfect for added security. Will not start vehicles with transponder system." I have a single key and remote.
trwiatt Posted February 28, 2004 Author Posted February 28, 2004 Thanks Byohzrd! Now I know what to go shopping for. BTW, ever seen this guy's service? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=46101 My local dealer says he'll trade ECUs for an hour worth of labor time, but this guy told me he'll re-program (and cut) any keys you send in with the ECU for the $99 deal. Plus he makes one for you. I think I can get an HYQ1512V for about $50 on EBay. Remember when you could go to the hardware store and get a duplicate made for 79 cents? Sheesh!
steviej Posted February 28, 2004 Posted February 28, 2004 Remember when you could go to the hardware store and get a duplicate made for 79 cents? Sheesh! yeah I do. Those were the cars you could steal with a screwdriver and a mallet. :whistles: steviej
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now