Sign in to follow this  

How To Change Front Dome Light On Sc300

Recommended Posts

I'm a new member here. Anyway, I try to replace the dome light on my SC300. it's always easy to replace high & low beams on SC300 but I just don't see where the dome light is. Any help will be appreciated.............

Share this post

Link to post
Share on other sites

my 93 sc400 has the light housing and the semi-clear window that the light comes through.

You have to use a flat head screw driver and put it up between the "window" and the plastic housing. Do this in the "rear" while you are siting in the drivers seat.

Seperate the clear window from the plastic housing in each corner area, as the "window" piece is held in place via 4 clips (molded plastic). 2 of the clips are in the "front" corners and 2 in the "rear" corners.

once you have the 2 back corner clips depressed, you should be able to pull the "windows" piece out by hand.

Hope this helps, since i had to figure it out myself on my car too.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this